arduino-heatpumpir/VaillantHeatpumpIR.h

57 lines
1.9 KiB
C++

/*
Vaillant VAI8 heatpump control (remote control P/N YAN1F1)
*/
#ifndef VaillantHeatpumpIR_h
#define VaillantHeatpumpIR_h
#include <HeatpumpIR.h>
// Vaillant timing constants
#define VAILLANT_AIRCON1_HDR_MARK 9000
#define VAILLANT_AIRCON1_HDR_SPACE 4000
#define VAILLANT_AIRCON1_BIT_MARK 620
#define VAILLANT_AIRCON1_ONE_SPACE 1600
#define VAILLANT_AIRCON1_ZERO_SPACE 540
#define VAILLANT_AIRCON1_MSG_SPACE 19000
// Power state
#define VAILLANT_AIRCON1_POWER_OFF 0x00
#define VAILLANT_AIRCON1_POWER_ON 0x08
// Operating modes
#define VAILLANT_AIRCON1_MODE_AUTO 0x00
#define VAILLANT_AIRCON1_MODE_COOL 0x01
#define VAILLANT_AIRCON1_MODE_DRY 0x02
#define VAILLANT_AIRCON1_MODE_FAN 0x03
#define VAILLANT_AIRCON1_MODE_HEAT 0x04
// Fan speeds. Note that some heatpumps have less than 5 fan speeds
#define VAILLANT_AIRCON1_FAN_AUTO 0x00 // Fan speed
#define VAILLANT_AIRCON1_FAN1 0x10 // * low
#define VAILLANT_AIRCON1_FAN2 0x20 // * med
#define VAILLANT_AIRCON1_FAN3 0x30 // * high
// Vertical air directions. Note that these cannot be set on all heat pumps
#define VAILLANT_VDIR_AUTO 0x00
#define VAILLANT_VDIR_MANUAL 0x00
#define VAILLANT_VDIR_SWING 0x01
#define VAILLANT_VDIR_UP 0x02
#define VAILLANT_VDIR_MUP 0x03
#define VAILLANT_VDIR_MIDDLE 0x04
#define VAILLANT_VDIR_MDOWN 0x05
#define VAILLANT_VDIR_DOWN 0x06
class VaillantHeatpumpIR : public HeatpumpIR
{
public:
VaillantHeatpumpIR();
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, bool turboModeCmd, bool lightCmd);
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
private:
void sendVaillant(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, bool turboMode, bool light);
};
#endif