/*
    Panasonic DKE/JKE/NKE heatpump control (DKE remote control P/N A75C2616 etc)
*/
#ifndef PanasonicAltDKEHeatpumpIR_h
#define PanasonicAltDKEHeatpumpIR_h

#include <HeatpumpIR.h>


// Panasonic DKE, JKE & NKE timing constants (DKE remote control P/N A75C2616)
#define PANASONIC_AIRCON2_HDR_MARK   3500
#define PANASONIC_AIRCON2_HDR_SPACE  1800
#define PANASONIC_AIRCON2_BIT_MARK   420
#define PANASONIC_AIRCON2_ONE_SPACE  1350
#define PANASONIC_AIRCON2_ZERO_SPACE 470
#define PANASONIC_AIRCON2_MSG_SPACE  10000

// Panasonic DKE, JNE & NKE codes
#define PANASONIC_AIRCON2_MODE_AUTO  0x00 // Operating mode
#define PANASONIC_AIRCON2_MODE_HEAT  0x40
#define PANASONIC_AIRCON2_MODE_COOL  0x30
#define PANASONIC_AIRCON2_MODE_DRY   0x20
#define PANASONIC_AIRCON2_MODE_FAN   0x60
#define PANASONIC_AIRCON2_MODE_OFF   0x00 // Power OFF
#define PANASONIC_AIRCON2_MODE_ON    0x01
#define PANASONIC_AIRCON2_TIMER_CNL  0x08
#define PANASONIC_AIRCON2_FAN_AUTO   0xA0 // Fan speed
#define PANASONIC_AIRCON2_FAN1       0x30
#define PANASONIC_AIRCON2_FAN2       0x40
#define PANASONIC_AIRCON2_FAN3       0x50
#define PANASONIC_AIRCON2_FAN4       0x60
#define PANASONIC_AIRCON2_FAN5       0x70
#define PANASONIC_AIRCON2_VS_AUTO    0x0F // Vertical swing
#define PANASONIC_AIRCON2_VS_UP      0x01
#define PANASONIC_AIRCON2_VS_MUP     0x02
#define PANASONIC_AIRCON2_VS_MIDDLE  0x03
#define PANASONIC_AIRCON2_VS_MDOWN   0x04
#define PANASONIC_AIRCON2_VS_DOWN    0x05
#define PANASONIC_AIRCON2_HS_AUTO    0x0D // Horizontal swing
#define PANASONIC_AIRCON2_HS_MIDDLE  0x06
#define PANASONIC_AIRCON2_HS_LEFT    0x09
#define PANASONIC_AIRCON2_HS_MLEFT   0x0A
#define PANASONIC_AIRCON2_HS_MRIGHT  0x0B
#define PANASONIC_AIRCON2_HS_RIGHT   0x0C
#define PANASONIC_AIRCON2_ION_ON     0x01 // Air ionizer on
#define PANASONIC_AIRCON2_ION_OFF    0x00 // Air ionizer off
#define PANASONIC_AIRCON2_QUIET_M    0x81 // Quiet setting, 1st byte
#define PANASONIC_AIRCON2_QUIET_L    0x33 // Quiet setting, 2nd byte
#define PANASONIC_AIRCON2_POWERFUL_M 0x86 // Powerful setting, 1st byte
#define PANASONIC_AIRCON2_POWERFUL_L 0x35 // Powerful setting, 2nd byte

#define PANASONIC_DKE 0

class PanasonicAltDKEHeatpumpIR : public HeatpumpIR
{
  public:
    PanasonicAltDKEHeatpumpIR();
    void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
    void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd, bool ionizerCmd);
    void send(IRSender& IR, bool quiet, bool powerful);

  private:
    void sendPanasonicLong(IRSender& IR, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, uint8_t swingH, uint8_t ionizer);
    void sendPanasonicShort(IRSender& IR, bool quiet, bool powerful);
    void sendPanasonic(IRSender& IR, uint8_t * panasonicTemplate, uint8_t templateLength);
};

#endif