/*
    Fujitsu Nocria (AWYZ14) heatpump control (remote control P/N AR-PZ2)
*/
#ifndef FujitsuHeatpumpIR_h
#define FujitsuHeatpumpIR_h

#include <HeatpumpIR.h>


// Fujitsu Nocria (AWYZ14) timing constants (remote control P/N AR-PZ2)
#define FUJITSU_AIRCON1_HDR_MARK    3210
#define FUJITSU_AIRCON1_HDR_SPACE   1680
#define FUJITSU_AIRCON1_BIT_MARK    410
#define FUJITSU_AIRCON1_ONE_SPACE   1230
#define FUJITSU_AIRCON1_ZERO_SPACE  440

// Fujitsu codes
#define FUJITSU_AIRCON1_MODE_AUTO   0x00 // Operating mode
#define FUJITSU_AIRCON1_MODE_HEAT   0x04
#define FUJITSU_AIRCON1_MODE_COOL   0x01
#define FUJITSU_AIRCON1_MODE_DRY    0x02
#define FUJITSU_AIRCON1_MODE_FAN    0x03
#define FUJITSU_AIRCON1_MODE_OFF    0xFF // Power OFF - not real codes, but we need something...
#define FUJITSU_AIRCON1_FAN_AUTO    0x00 // Fan speed
#define FUJITSU_AIRCON1_FAN1        0x04
#define FUJITSU_AIRCON1_FAN2        0x03
#define FUJITSU_AIRCON1_FAN3        0x02
#define FUJITSU_AIRCON1_FAN4        0x01
#define FUJITSU_AIRCON1_VDIR_MANUAL 0x00 // Air direction modes
#define FUJITSU_AIRCON1_VDIR_SWING  0x10
#define FUJITSU_AIRCON1_HDIR_MANUAL 0x00
#define FUJITSU_AIRCON1_HDIR_SWING  0x20
#define FUJITSU_AIRCON1_ECO_OFF     0x20
#define FUJITSU_AIRCON1_ECO_ON      0x00



class FujitsuHeatpumpIR : public HeatpumpIR
{
  public:
    FujitsuHeatpumpIR();
    void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
    void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd, bool ecoModeCmd);
    void sendFujitsuHiPower(IRSender& IR);
    void sendFujitsuEcoMode(IRSender& IR);
    void sendFujitsuSwingOff(IRSender& IR);
    void sendFujitsuVerticalSwingOn(IRSender& IR);
    void sendFujitsuHorizontalSwingOn(IRSender& IR);
    void sendFujitsuSwingOn(IRSender& IR);
    void sendFujitsuFilterClean(IRSender& IR);
    void sendFujitsuSuperQuiet(IRSender& IR);
    void sendNextVerticalPosition(IRSender& IR);
    void sendNextHorizontalPosition(IRSender& IR);
    void sendFujitsuTestRun(IRSender& IR);

  private:
    void sendFujitsu(IRSender& IR, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, uint8_t swingH, uint8_t ecoMode);
    void sendFujitsuMsg(IRSender& IR, uint8_t msgSize, uint8_t *msg);
};

#endif