Toshiba Daiseikai added, based on Carrier NQV.
This commit is contained in:
parent
3d90bfb2bd
commit
ca26d28ca6
|
@ -19,6 +19,15 @@ CarrierNQVHeatpumpIR::CarrierNQVHeatpumpIR() : CarrierHeatpumpIR()
|
||||||
_info = info;
|
_info = info;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
DaiseikaiHeatpumpIR::DaiseikaiHeatpumpIR() : CarrierHeatpumpIR()
|
||||||
|
{
|
||||||
|
static const char PROGMEM model[] PROGMEM = "carrier_nqv";
|
||||||
|
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"carrier_nqv\",\"dn\":\"Carrier NQV\",\"mT\":17,\"xT\":30,\"fs\":6}";
|
||||||
|
|
||||||
|
_model = model;
|
||||||
|
_info = info;
|
||||||
|
}
|
||||||
|
|
||||||
CarrierMCAHeatpumpIR::CarrierMCAHeatpumpIR() : CarrierHeatpumpIR()
|
CarrierMCAHeatpumpIR::CarrierMCAHeatpumpIR() : CarrierHeatpumpIR()
|
||||||
{
|
{
|
||||||
static const char PROGMEM model[] PROGMEM = "carrier_mca";
|
static const char PROGMEM model[] PROGMEM = "carrier_mca";
|
||||||
|
@ -297,3 +306,162 @@ void CarrierMCAHeatpumpIR::sendCarrier(IRSender& IR, uint8_t powerMode, uint8_t
|
||||||
IR.mark(CARRIER_AIRCON2_BIT_MARK);
|
IR.mark(CARRIER_AIRCON2_BIT_MARK);
|
||||||
IR.space(0);
|
IR.space(0);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void DaiseikaiHeatpumpIR::send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd)
|
||||||
|
{
|
||||||
|
(void)swingVCmd;
|
||||||
|
(void)swingHCmd;
|
||||||
|
|
||||||
|
// Sensible defaults for the heat pump mode
|
||||||
|
|
||||||
|
uint8_t operatingMode = DAISEIKAI_AIRCON1_MODE_HEAT;
|
||||||
|
uint8_t fanSpeed = DAISEIKAI_AIRCON1_FAN_AUTO;
|
||||||
|
uint8_t temperature = 23;
|
||||||
|
|
||||||
|
if (powerModeCmd == POWER_OFF)
|
||||||
|
{
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_OFF;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
switch (operatingModeCmd)
|
||||||
|
{
|
||||||
|
case MODE_AUTO:
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_AUTO;
|
||||||
|
break;
|
||||||
|
case MODE_HEAT:
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_HEAT;
|
||||||
|
break;
|
||||||
|
case MODE_COOL:
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_COOL;
|
||||||
|
break;
|
||||||
|
case MODE_DRY:
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_DRY;
|
||||||
|
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in DRY mode
|
||||||
|
break;
|
||||||
|
case MODE_FAN:
|
||||||
|
operatingMode = DAISEIKAI_AIRCON1_MODE_FAN;
|
||||||
|
temperatureCmd = 22; // Temperature is always 22 in FAN mode
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (fanSpeedCmd)
|
||||||
|
{
|
||||||
|
case FAN_AUTO:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN_AUTO;
|
||||||
|
break;
|
||||||
|
case FAN_1:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN1;
|
||||||
|
break;
|
||||||
|
case FAN_2:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN2;
|
||||||
|
break;
|
||||||
|
case FAN_3:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN3;
|
||||||
|
break;
|
||||||
|
case FAN_4:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN4;
|
||||||
|
break;
|
||||||
|
case FAN_5:
|
||||||
|
fanSpeed = DAISEIKAI_AIRCON1_FAN5;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (temperatureCmd > 16 && temperatureCmd < 31)
|
||||||
|
{
|
||||||
|
temperature = temperatureCmd;
|
||||||
|
}
|
||||||
|
|
||||||
|
sendCarrier(IR, operatingMode, fanSpeed, temperature);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Send the Carrier code
|
||||||
|
// Carrier has the LSB and MSB in different format than Panasonic
|
||||||
|
|
||||||
|
void DaiseikaiHeatpumpIR::sendCarrier(IRSender& IR, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature)
|
||||||
|
{
|
||||||
|
uint8_t sendBuffer[] = { 0x4f, 0xb0, 0xc0, 0x3f, 0x80, 0x00, 0x00, 0x00, 0x00 }; // The data is on the last four bytes
|
||||||
|
|
||||||
|
static const uint8_t temperatures[] PROGMEM = { 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e, 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b };
|
||||||
|
uint8_t checksum = 0;
|
||||||
|
|
||||||
|
// PROGMEM arrays cannot be addressed directly, see http://forum.arduino.cc/index.php?topic=106603.0
|
||||||
|
sendBuffer[5] = pgm_read_byte(&(temperatures[(temperature-17)]));
|
||||||
|
|
||||||
|
sendBuffer[6] = operatingMode | fanSpeed;
|
||||||
|
|
||||||
|
// Checksum
|
||||||
|
|
||||||
|
for (int i=0; i<8; i++) {
|
||||||
|
checksum += IR.bitReverse(sendBuffer[i]);
|
||||||
|
}
|
||||||
|
|
||||||
|
// There's something really strange with the checksum calculation...
|
||||||
|
// With these many of the codes matchs with the code from the real Carrier remote
|
||||||
|
// Still certain temperatures do not work with fan speeds 1, 2 or 5
|
||||||
|
|
||||||
|
switch (sendBuffer[6] & 0xF0) {
|
||||||
|
case 0x00: // MODE_AUTO - certain temperature / fan speed combinations do not work
|
||||||
|
checksum += 0x02;
|
||||||
|
switch (sendBuffer[6] & 0x0F) {
|
||||||
|
case 0x02: // FAN1
|
||||||
|
case 0x03: // FAN5
|
||||||
|
case 0x06: // FAN2
|
||||||
|
checksum += 0x80;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 0x40: // MODE_DRY - all settings should work
|
||||||
|
checksum += 0x02;
|
||||||
|
break;
|
||||||
|
case 0xC0: // MODE_HEAT - certain temperature / fan speed combinations do not work
|
||||||
|
switch (sendBuffer[6] & 0x0F) {
|
||||||
|
case 0x05: // FAN4
|
||||||
|
case 0x06: // FAN2
|
||||||
|
checksum += 0xC0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 0x20: // MODE_FAN - all settings should work
|
||||||
|
checksum += 0x02;
|
||||||
|
switch (sendBuffer[6] & 0x0F) {
|
||||||
|
case 0x02: // FAN1
|
||||||
|
case 0x03: // FAN5
|
||||||
|
case 0x06: // FAN2
|
||||||
|
checksum += 0x80;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
sendBuffer[8] = IR.bitReverse(checksum);
|
||||||
|
|
||||||
|
// 38 kHz PWM frequency
|
||||||
|
IR.setFrequency(38);
|
||||||
|
|
||||||
|
// Header
|
||||||
|
IR.mark(DAISEIKAI_AIRCON1_HDR_MARK);
|
||||||
|
IR.space(DAISEIKAI_AIRCON1_HDR_SPACE);
|
||||||
|
|
||||||
|
// Payload
|
||||||
|
for (size_t i=0; i<sizeof(sendBuffer); i++) {
|
||||||
|
IR.sendIRbyte(sendBuffer[i], DAISEIKAI_AIRCON1_BIT_MARK, DAISEIKAI_AIRCON1_ZERO_SPACE, DAISEIKAI_AIRCON1_ONE_SPACE);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Pause + new header
|
||||||
|
IR.mark(DAISEIKAI_AIRCON1_BIT_MARK);
|
||||||
|
IR.space(DAISEIKAI_AIRCON1_MSG_SPACE);
|
||||||
|
|
||||||
|
IR.mark(DAISEIKAI_AIRCON1_HDR_MARK);
|
||||||
|
IR.space(DAISEIKAI_AIRCON1_HDR_SPACE);
|
||||||
|
|
||||||
|
// Payload again
|
||||||
|
for (size_t i=0; i<sizeof(sendBuffer); i++) {
|
||||||
|
IR.sendIRbyte(sendBuffer[i], DAISEIKAI_AIRCON1_BIT_MARK, DAISEIKAI_AIRCON1_ZERO_SPACE, DAISEIKAI_AIRCON1_ONE_SPACE);
|
||||||
|
}
|
||||||
|
|
||||||
|
// End mark
|
||||||
|
IR.mark(DAISEIKAI_AIRCON1_BIT_MARK);
|
||||||
|
IR.space(0);
|
||||||
|
}
|
||||||
|
|
|
@ -29,6 +29,29 @@
|
||||||
#define CARRIER_AIRCON1_FAN4 0x05
|
#define CARRIER_AIRCON1_FAN4 0x05
|
||||||
#define CARRIER_AIRCON1_FAN5 0x03
|
#define CARRIER_AIRCON1_FAN5 0x03
|
||||||
|
|
||||||
|
// Toshiba Daiseikai (RAS-10G2KVP-E RAS-10G2AVP-E and RAS-13G2KVP-E RAS-13G2AVP-E) timing constants (remote control P/N WH-TA01EE)
|
||||||
|
// https://github.com/ToniA/arduino-heatpumpir/issues/23
|
||||||
|
#define DAISEIKAI_AIRCON1_HDR_MARK 4320
|
||||||
|
#define DAISEIKAI_AIRCON1_HDR_SPACE 4350
|
||||||
|
#define DAISEIKAI_AIRCON1_BIT_MARK 500
|
||||||
|
#define DAISEIKAI_AIRCON1_ONE_SPACE 1650
|
||||||
|
#define DAISEIKAI_AIRCON1_ZERO_SPACE 550
|
||||||
|
#define DAISEIKAI_AIRCON1_MSG_SPACE 7400
|
||||||
|
|
||||||
|
// Toshiba Daiseikai (Carrier) codes. Same as CarrierNQV ?
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_AUTO 0x00 // Operating mode
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_HEAT 0xC0
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_COOL 0x80
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_DRY 0x40
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_FAN 0x20
|
||||||
|
#define DAISEIKAI_AIRCON1_MODE_OFF 0xE0 // Power OFF
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN1 0x02
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN2 0x06
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN3 0x01
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN4 0x05
|
||||||
|
#define DAISEIKAI_AIRCON1_FAN5 0x03
|
||||||
|
|
||||||
|
|
||||||
// Carrier (42MCA009515LS) timing constants (remote control P/N R11CG/E)
|
// Carrier (42MCA009515LS) timing constants (remote control P/N R11CG/E)
|
||||||
#define CARRIER_AIRCON2_HDR_MARK 4510
|
#define CARRIER_AIRCON2_HDR_MARK 4510
|
||||||
|
@ -85,4 +108,17 @@ class CarrierMCAHeatpumpIR : public CarrierHeatpumpIR
|
||||||
void sendCarrier(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature);
|
void sendCarrier(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature);
|
||||||
};
|
};
|
||||||
|
|
||||||
|
class DaiseikaiHeatpumpIR : public CarrierHeatpumpIR
|
||||||
|
{
|
||||||
|
public:
|
||||||
|
DaiseikaiHeatpumpIR();
|
||||||
|
|
||||||
|
public:
|
||||||
|
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
|
||||||
|
|
||||||
|
private:
|
||||||
|
void sendCarrier(IRSender& IR, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature);
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -11,6 +11,9 @@ Currently supports at least these models
|
||||||
* Also other Midea models sold as 'Ultimate', even some inverter models
|
* Also other Midea models sold as 'Ultimate', even some inverter models
|
||||||
* Also Onnline (sold through Onninen) has been reported to work
|
* Also Onnline (sold through Onninen) has been reported to work
|
||||||
* Carrier 42NQV035G / 38NYV035H2 (Carrier remote control P/N WH-L05SE)
|
* Carrier 42NQV035G / 38NYV035H2 (Carrier remote control P/N WH-L05SE)
|
||||||
|
* Toshiba Daiseikai (Toshiba remote control P/N WH-TA01EE).
|
||||||
|
* Fully compatible with CarrierNQV functions instead of Daiseikai functions.
|
||||||
|
* Tested with: RAS-10G2KVP-E RAS-10G2AVP-E and RAS-13G2KVP-E RAS-13G2AVP-E
|
||||||
* Fujitsu Nocria AWYZ14 (remote control P/N AR-PZ2)
|
* Fujitsu Nocria AWYZ14 (remote control P/N AR-PZ2)
|
||||||
* Mitsubishi MSZ FD-25, probably also FD-35 (remote control P/N KM09D 0052376)
|
* Mitsubishi MSZ FD-25, probably also FD-35 (remote control P/N KM09D 0052376)
|
||||||
* Hisense AUD (remote control Y-H1-01, Y-H1-02(E), Y-J1, Y-E4-07) probably AUC model
|
* Hisense AUD (remote control Y-H1-01, Y-H1-02(E), Y-J1, Y-E4-07) probably AUC model
|
||||||
|
|
|
@ -0,0 +1,58 @@
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include <CarrierHeatpumpIR.h>
|
||||||
|
|
||||||
|
IRSenderPWM irSender(9); // IR led on Duemilanove digital pin 3, using Arduino PWM
|
||||||
|
//IRSenderBlaster irSender(3); // IR led on Duemilanove digital pin 3, using IR Blaster (generates the 38 kHz carrier)
|
||||||
|
|
||||||
|
CarrierNQVHeatpumpIR *heatpumpIR;
|
||||||
|
|
||||||
|
int redLED = 6;
|
||||||
|
int orangeLED = 5;
|
||||||
|
int greenLED = 4;
|
||||||
|
int blueLED = 3;
|
||||||
|
|
||||||
|
void setup()
|
||||||
|
{
|
||||||
|
Serial.begin(9600);
|
||||||
|
pinMode(redLED, OUTPUT);
|
||||||
|
pinMode(orangeLED, OUTPUT);
|
||||||
|
pinMode(greenLED, OUTPUT);
|
||||||
|
pinMode(blueLED, OUTPUT);
|
||||||
|
delay(500);
|
||||||
|
heatpumpIR = new CarrierNQVHeatpumpIR();
|
||||||
|
Serial.println(F("Starting"));
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop()
|
||||||
|
{
|
||||||
|
const char* buf;
|
||||||
|
|
||||||
|
Serial.print(F("Sending IR to "));
|
||||||
|
// Print the model
|
||||||
|
buf = heatpumpIR->model();
|
||||||
|
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||||
|
while (char modelChar = pgm_read_byte(buf++))
|
||||||
|
{
|
||||||
|
Serial.print(modelChar);
|
||||||
|
}
|
||||||
|
Serial.print(F(", info: "));
|
||||||
|
// Print the info
|
||||||
|
buf = heatpumpIR->info();
|
||||||
|
// 'info' is a PROGMEM pointer, so need to write a byte at a time
|
||||||
|
while (char infoChar = pgm_read_byte(buf++))
|
||||||
|
{
|
||||||
|
Serial.print(infoChar);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
|
||||||
|
digitalWrite(orangeLED,HIGH);
|
||||||
|
delay(4000);
|
||||||
|
heatpumpIR->send(irSender, POWER_ON, MODE_HEAT, FAN_AUTO, 24, VDIR_AUTO, HDIR_AUTO);
|
||||||
|
digitalWrite(orangeLED,LOW);
|
||||||
|
|
||||||
|
digitalWrite(redLED, HIGH);
|
||||||
|
|
||||||
|
// don't loop()
|
||||||
|
for(;;)
|
||||||
|
;
|
||||||
|
}
|
|
@ -0,0 +1,58 @@
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include <CarrierHeatpumpIR.h>
|
||||||
|
|
||||||
|
IRSenderPWM irSender(9); // IR led on Duemilanove digital pin 3, using Arduino PWM
|
||||||
|
//IRSenderBlaster irSender(3); // IR led on Duemilanove digital pin 3, using IR Blaster (generates the 38 kHz carrier)
|
||||||
|
|
||||||
|
DaiseikaiHeatpumpIR *heatpumpIR;
|
||||||
|
|
||||||
|
int redLED = 6;
|
||||||
|
int orangeLED = 5;
|
||||||
|
int greenLED = 4;
|
||||||
|
int blueLED = 3;
|
||||||
|
|
||||||
|
void setup()
|
||||||
|
{
|
||||||
|
Serial.begin(9600);
|
||||||
|
pinMode(redLED, OUTPUT);
|
||||||
|
pinMode(orangeLED, OUTPUT);
|
||||||
|
pinMode(greenLED, OUTPUT);
|
||||||
|
pinMode(blueLED, OUTPUT);
|
||||||
|
delay(500);
|
||||||
|
heatpumpIR = new DaiseikaiHeatpumpIR();
|
||||||
|
Serial.println(F("Starting"));
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop()
|
||||||
|
{
|
||||||
|
const char* buf;
|
||||||
|
|
||||||
|
Serial.print(F("Sending IR to "));
|
||||||
|
// Print the model
|
||||||
|
buf = heatpumpIR->model();
|
||||||
|
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||||
|
while (char modelChar = pgm_read_byte(buf++))
|
||||||
|
{
|
||||||
|
Serial.print(modelChar);
|
||||||
|
}
|
||||||
|
Serial.print(F(", info: "));
|
||||||
|
// Print the info
|
||||||
|
buf = heatpumpIR->info();
|
||||||
|
// 'info' is a PROGMEM pointer, so need to write a byte at a time
|
||||||
|
while (char infoChar = pgm_read_byte(buf++))
|
||||||
|
{
|
||||||
|
Serial.print(infoChar);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
|
||||||
|
digitalWrite(orangeLED,HIGH);
|
||||||
|
delay(4000);
|
||||||
|
heatpumpIR->send(irSender, POWER_ON, MODE_AUTO, FAN_AUTO, 24, VDIR_AUTO, HDIR_AUTO);
|
||||||
|
digitalWrite(orangeLED,LOW);
|
||||||
|
|
||||||
|
digitalWrite(redLED, HIGH);
|
||||||
|
|
||||||
|
// don't loop()
|
||||||
|
for(;;)
|
||||||
|
;
|
||||||
|
}
|
|
@ -7,6 +7,7 @@ PanasonicNKEHeatpumpIR KEYWORD1
|
||||||
PanasonicLKEHeatpumpIR KEYWORD1
|
PanasonicLKEHeatpumpIR KEYWORD1
|
||||||
CarrierHeatpumpIR KEYWORD1
|
CarrierHeatpumpIR KEYWORD1
|
||||||
CarrierNQVHeatpumpIR KEYWORD1
|
CarrierNQVHeatpumpIR KEYWORD1
|
||||||
|
DaiseikaiHeatpumpIR KEYWORD1
|
||||||
CarrierMCAHeatpumpIR KEYWORD1
|
CarrierMCAHeatpumpIR KEYWORD1
|
||||||
MideaHeatpumpIR KEYWORD1
|
MideaHeatpumpIR KEYWORD1
|
||||||
FujitsuHeatpumpIR KEYWORD1
|
FujitsuHeatpumpIR KEYWORD1
|
||||||
|
@ -41,4 +42,4 @@ send KEYWORD2
|
||||||
model KEYWORD2
|
model KEYWORD2
|
||||||
info KEYWORD2
|
info KEYWORD2
|
||||||
|
|
||||||
sendPanasonicCKPCancelTimer KEYWORD2
|
sendPanasonicCKPCancelTimer KEYWORD2
|
||||||
|
|
Loading…
Reference in New Issue