Merge pull request #134 from ikilledmypc/electrolux-gree
Support for Electrolux YAL1F
This commit is contained in:
Toni
GitHub
commit
9958a3b508
|
|
@ -0,0 +1,178 @@
|
|||
#include "ElectroluxHeatpumpIR.h"
|
||||
|
||||
// This is a protected method, i.e. generic Electrolux instances cannot be created
|
||||
ElectroluxHeatpumpIR::ElectroluxHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
}
|
||||
|
||||
// Support for YAL1F remote
|
||||
ElectroluxYALHeatpumpIR::ElectroluxYALHeatpumpIR() : ElectroluxHeatpumpIR()
|
||||
{
|
||||
static const char model[] PROGMEM = "electroluxyal";
|
||||
static const char info[] PROGMEM = "{\"mdl\":\"electroluxyal\",\"dn\":\"Electrolux YAL\",\"mT\":16,\"xT\":30,\"fs\":3}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
electroluxModel = ELECTROLUX_YAL;
|
||||
}
|
||||
|
||||
void ElectroluxHeatpumpIR::send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd)
|
||||
{
|
||||
(void)swingVCmd;
|
||||
(void)swingHCmd;
|
||||
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
uint8_t powerMode = ELECTROLUX_AIRCON1_POWER_ON;
|
||||
uint8_t operatingMode = ELECTROLUX_AIRCON1_MODE_HEAT;
|
||||
uint8_t fanSpeed = ELECTROLUX_AIRCON1_FAN_AUTO;
|
||||
uint8_t temperature = 21;
|
||||
uint8_t swingV = ELECTROLUX_VDIR_AUTO;
|
||||
uint8_t swingH = ELECTROLUX_HDIR_AUTO;
|
||||
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
powerMode = ELECTROLUX_AIRCON1_POWER_OFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = ELECTROLUX_AIRCON1_MODE_AUTO;
|
||||
temperatureCmd = 25;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = ELECTROLUX_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = ELECTROLUX_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = ELECTROLUX_AIRCON1_MODE_DRY;
|
||||
fanSpeedCmd = FAN_1;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = ELECTROLUX_AIRCON1_MODE_FAN;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = ELECTROLUX_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = ELECTROLUX_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = ELECTROLUX_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = ELECTROLUX_AIRCON1_FAN3;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_AUTO:
|
||||
swingV = ELECTROLUX_VDIR_AUTO;
|
||||
break;
|
||||
case VDIR_SWING:
|
||||
swingV = ELECTROLUX_VDIR_SWING;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (swingHCmd)
|
||||
{
|
||||
case HDIR_AUTO:
|
||||
swingH = ELECTROLUX_HDIR_AUTO;
|
||||
break;
|
||||
case HDIR_SWING:
|
||||
swingH = ELECTROLUX_HDIR_SWING;
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
if (temperatureCmd > 15 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd - 16;
|
||||
}
|
||||
|
||||
sendElectrolux(IR, powerMode, operatingMode, fanSpeed, temperature, swingV, swingH);
|
||||
}
|
||||
|
||||
// Send the Electrolux code
|
||||
void ElectroluxHeatpumpIR::sendElectrolux(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, uint8_t swingH)
|
||||
{
|
||||
|
||||
uint8_t ElectroluxTemplate[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00 };
|
||||
// 0 1 2 3 4 5 6 7
|
||||
uint8_t i;
|
||||
|
||||
// Set the Fan speed, operating mode and power state
|
||||
ElectroluxTemplate[0] = fanSpeed | operatingMode | powerMode;
|
||||
// Set the temperature
|
||||
ElectroluxTemplate[1] = temperature;
|
||||
|
||||
ElectroluxTemplate[2] = 0x20; // bits 0..3 always 0000, bits 4..7 TURBO,LIGHT,HEALTH,X-FAN
|
||||
ElectroluxTemplate[3] = 0x50; // bits 4..7 always 0101
|
||||
ElectroluxTemplate[6] = 0x00;
|
||||
|
||||
if (swingV == ELECTROLUX_VDIR_SWING)
|
||||
{
|
||||
ElectroluxTemplate[0] |= (1 << 6); // Enable swing by setting bit 6
|
||||
ElectroluxTemplate[4] |= 0x01; // Set vertical swing direction
|
||||
}
|
||||
if(swingH == ELECTROLUX_HDIR_SWING)
|
||||
{
|
||||
ElectroluxTemplate[0] |= (1 << 6); // Enable swing by setting bit 6
|
||||
ElectroluxTemplate[4] |= 0x10; // Set horizontal swing direction
|
||||
}
|
||||
|
||||
ElectroluxTemplate[7] = (((
|
||||
(ElectroluxTemplate[0] & 0x0F) +
|
||||
(ElectroluxTemplate[1] & 0x0F) +
|
||||
(ElectroluxTemplate[2] & 0x0F) +
|
||||
(ElectroluxTemplate[3] & 0x0F) +
|
||||
((ElectroluxTemplate[4] & 0xF0) >> 4) +
|
||||
((ElectroluxTemplate[5] & 0xF0) >> 4) +
|
||||
((ElectroluxTemplate[6] & 0xF0) >> 4) +
|
||||
0x0A) & 0x0F) << 4) | (ElectroluxTemplate[7] & 0x0F);
|
||||
|
||||
// 38 kHz PWM frequency
|
||||
IR.setFrequency(38);
|
||||
|
||||
// Send Header mark
|
||||
IR.mark(ELECTROLUX_AIRCON1_HDR_MARK);
|
||||
IR.space(ELECTROLUX_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload part #1
|
||||
for (i=0; i<4; i++) {
|
||||
IR.sendIRbyte(ElectroluxTemplate[i], ELECTROLUX_AIRCON1_BIT_MARK, ELECTROLUX_AIRCON1_ZERO_SPACE, ELECTROLUX_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
// Only three first bits of byte 4 are sent, this is always '010'
|
||||
IR.mark(ELECTROLUX_AIRCON1_BIT_MARK);
|
||||
IR.space(ELECTROLUX_AIRCON1_ZERO_SPACE);
|
||||
IR.mark(ELECTROLUX_AIRCON1_BIT_MARK);
|
||||
IR.space(ELECTROLUX_AIRCON1_ONE_SPACE);
|
||||
IR.mark(ELECTROLUX_AIRCON1_BIT_MARK);
|
||||
IR.space(ELECTROLUX_AIRCON1_ZERO_SPACE);
|
||||
|
||||
// Message space
|
||||
IR.mark(ELECTROLUX_AIRCON1_BIT_MARK);
|
||||
IR.space(ELECTROLUX_AIRCON1_MSG_SPACE);
|
||||
|
||||
// Payload part #2
|
||||
for (i=4; i<8; i++) {
|
||||
IR.sendIRbyte(ElectroluxTemplate[i], ELECTROLUX_AIRCON1_BIT_MARK, ELECTROLUX_AIRCON1_ZERO_SPACE, ELECTROLUX_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(ELECTROLUX_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
/*
|
||||
Electrolux heatpump control (remote control YAL1F) Based on Gree YAC
|
||||
*/
|
||||
#ifndef ElectroluxHeatpumpIR_h
|
||||
#define ElectroluxHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
// Electrolux timing constants
|
||||
#define ELECTROLUX_AIRCON1_HDR_MARK 9000
|
||||
#define ELECTROLUX_AIRCON1_HDR_SPACE 4000
|
||||
#define ELECTROLUX_AIRCON1_BIT_MARK 620
|
||||
#define ELECTROLUX_AIRCON1_ONE_SPACE 1600
|
||||
#define ELECTROLUX_AIRCON1_ZERO_SPACE 540
|
||||
#define ELECTROLUX_AIRCON1_MSG_SPACE 19000
|
||||
|
||||
|
||||
// Power state
|
||||
#define ELECTROLUX_AIRCON1_POWER_OFF 0x00
|
||||
#define ELECTROLUX_AIRCON1_POWER_ON 0x08
|
||||
|
||||
// Operating modes
|
||||
// Electrolux codes
|
||||
#define ELECTROLUX_AIRCON1_MODE_AUTO 0x00
|
||||
#define ELECTROLUX_AIRCON1_MODE_COOL 0x01
|
||||
#define ELECTROLUX_AIRCON1_MODE_DRY 0x02
|
||||
#define ELECTROLUX_AIRCON1_MODE_FAN 0x03
|
||||
#define ELECTROLUX_AIRCON1_MODE_HEAT 0x04
|
||||
|
||||
// Fan speeds. Note that some heatpumps have less than 5 fan speeds
|
||||
#define ELECTROLUX_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||
#define ELECTROLUX_AIRCON1_FAN1 0x10 // * 1
|
||||
#define ELECTROLUX_AIRCON1_FAN2 0x20 // * 2
|
||||
#define ELECTROLUX_AIRCON1_FAN3 0x30 // * 3
|
||||
|
||||
// Vertical air directions. Note that these cannot be set on all heat pumps
|
||||
#define ELECTROLUX_VDIR_AUTO 0x00
|
||||
#define ELECTROLUX_VDIR_SWING 0x01
|
||||
|
||||
// Horizontal air directions. Note that these cannot be set on all heat pumps
|
||||
#define ELECTROLUX_HDIR_AUTO 0x00
|
||||
#define ELECTROLUX_HDIR_SWING 0x01
|
||||
|
||||
#define ELECTROLUX_YAL 0
|
||||
|
||||
|
||||
class ElectroluxHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
protected:
|
||||
ElectroluxHeatpumpIR();
|
||||
uint8_t electroluxModel;
|
||||
|
||||
public:
|
||||
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
|
||||
|
||||
private:
|
||||
void sendElectrolux(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, uint8_t swingH);
|
||||
};
|
||||
|
||||
|
||||
class ElectroluxYALHeatpumpIR : public ElectroluxHeatpumpIR
|
||||
{
|
||||
public:
|
||||
ElectroluxYALHeatpumpIR();
|
||||
|
||||
public:
|
||||
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd)
|
||||
{
|
||||
ElectroluxHeatpumpIR::send(IR, powerModeCmd, operatingModeCmd, fanSpeedCmd, temperatureCmd, swingVCmd, swingHCmd);
|
||||
}
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue