AIRWAY aiconditioner support
This commit is contained in:
mmanza
parent
833fd92e65
commit
3238810b54
|
|
@ -0,0 +1,138 @@
|
|||
#include <AIRWAYHeatpumpIR.h>
|
||||
|
||||
|
||||
AIRWAYHeatpumpIR::AIRWAYHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "AIRWAY";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"AIRWAY\",\"dn\":\"AIRWAY\",\"mT\":18,\"xT\":31,\"fs\":3}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void AIRWAYHeatpumpIR::send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd)
|
||||
{
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
uint8_t powerMode = AIRWAY_AIRCON1_MODE_ON;
|
||||
uint8_t operatingMode = AIRWAY_AIRCON1_MODE_HEAT;
|
||||
uint8_t fanSpeed = AIRWAY_AIRCON1_FAN_AUTO;
|
||||
uint8_t temperature = 23;
|
||||
uint8_t swingV = AIRWAY_AIRCON1_VS_SWING;
|
||||
|
||||
(void)swingHCmd;
|
||||
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
powerMode = AIRWAY_AIRCON1_MODE_OFF;
|
||||
swingVCmd = VDIR_MUP;
|
||||
}
|
||||
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = AIRWAY_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = AIRWAY_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = AIRWAY_AIRCON1_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = AIRWAY_AIRCON1_MODE_FAN;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = AIRWAY_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = AIRWAY_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = AIRWAY_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = AIRWAY_AIRCON1_FAN3;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 17 && temperatureCmd < 32)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_AUTO:
|
||||
swingV = AIRWAY_AIRCON1_VS_AUTO;
|
||||
break;
|
||||
case VDIR_SWING:
|
||||
swingV = AIRWAY_AIRCON1_VS_SWING;
|
||||
break;
|
||||
case VDIR_UP:
|
||||
swingV = AIRWAY_AIRCON1_VS_UP;
|
||||
break;
|
||||
case VDIR_MUP:
|
||||
swingV = AIRWAY_AIRCON1_VS_MUP;
|
||||
break;
|
||||
case VDIR_MIDDLE:
|
||||
swingV = AIRWAY_AIRCON1_VS_MIDDLE;
|
||||
break;
|
||||
case VDIR_MDOWN:
|
||||
swingV = AIRWAY_AIRCON1_VS_MDOWN;
|
||||
break;
|
||||
case VDIR_DOWN:
|
||||
swingV = AIRWAY_AIRCON1_VS_DOWN;
|
||||
break;
|
||||
}
|
||||
|
||||
sendAIRWAY(IR, powerMode, operatingMode, fanSpeed, temperature, swingV, 0);
|
||||
}
|
||||
|
||||
|
||||
void AIRWAYHeatpumpIR::sendAIRWAY(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingV, uint8_t swingH)
|
||||
{
|
||||
uint8_t AIRWAYTemplate[] = { 0x23, 0xCB, 0x26, 0x01, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
||||
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13
|
||||
|
||||
uint8_t checksum = 0x00;
|
||||
(void)swingH;
|
||||
|
||||
// Set the operatingmode on the template message
|
||||
AIRWAYTemplate[5] |= powerMode;
|
||||
AIRWAYTemplate[6] |= operatingMode;
|
||||
|
||||
// Set the temperature on the template message
|
||||
AIRWAYTemplate[7] |= 31 - temperature;
|
||||
|
||||
// Set the fan speed and vertical air direction on the template message
|
||||
AIRWAYTemplate[8] |= fanSpeed | swingV;
|
||||
// Calculate the checksum
|
||||
for (unsigned int i=0; i < (sizeof(AIRWAYTemplate)-1); i++) {
|
||||
checksum += AIRWAYTemplate[i];
|
||||
}
|
||||
|
||||
AIRWAYTemplate[13] = checksum;
|
||||
|
||||
// 38 kHz PWM frequency
|
||||
IR.setFrequency(38);
|
||||
|
||||
// Header
|
||||
IR.mark(AIRWAY_AIRCON1_HDR_MARK);
|
||||
IR.space(AIRWAY_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Data
|
||||
for (unsigned int i=0; i<sizeof(AIRWAYTemplate); i++) {
|
||||
IR.sendIRbyte(AIRWAYTemplate[i], AIRWAY_AIRCON1_BIT_MARK, AIRWAY_AIRCON1_ZERO_SPACE, AIRWAY_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(AIRWAY_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
/*
|
||||
AIRWAY etc. (Vivax, Classe, NEO, Galanz, Simbio, Beko, Sintech) heatpump control (remote control P/N GZ-1002B-E3)
|
||||
|
||||
*/
|
||||
#ifndef AIRWAYHeatpumpIR_h
|
||||
#define AIRWAYHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
//AIRWAY timing constants
|
||||
#define AIRWAY_AIRCON1_HDR_MARK 3080
|
||||
#define AIRWAY_AIRCON1_HDR_SPACE 1700
|
||||
#define AIRWAY_AIRCON1_BIT_MARK 400
|
||||
#define AIRWAY_AIRCON1_ONE_SPACE 1060
|
||||
#define AIRWAY_AIRCON1_ZERO_SPACE 320
|
||||
|
||||
// AIRWAY codes
|
||||
#define AIRWAY_AIRCON1_MODE_AUTO 0x08 // Operating mode
|
||||
#define AIRWAY_AIRCON1_MODE_HEAT 0x01
|
||||
#define AIRWAY_AIRCON1_MODE_COOL 0x03
|
||||
#define AIRWAY_AIRCON1_MODE_DRY 0x02
|
||||
#define AIRWAY_AIRCON1_MODE_FAN 0x07
|
||||
#define AIRWAY_AIRCON1_MODE_ON 0x04 // Power ON
|
||||
#define AIRWAY_AIRCON1_MODE_OFF 0x00
|
||||
#define AIRWAY_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||
#define AIRWAY_AIRCON1_FAN1 0x02
|
||||
#define AIRWAY_AIRCON1_FAN2 0x03
|
||||
#define AIRWAY_AIRCON1_FAN3 0x05
|
||||
|
||||
#define AIRWAY_AIRCON1_VS_AUTO 0x00 // Vertical swing
|
||||
#define AIRWAY_AIRCON1_VS_UP 0x08
|
||||
#define AIRWAY_AIRCON1_VS_MUP 0x10
|
||||
#define AIRWAY_AIRCON1_VS_MIDDLE 0x18
|
||||
#define AIRWAY_AIRCON1_VS_MDOWN 0x20
|
||||
#define AIRWAY_AIRCON1_VS_DOWN 0x28
|
||||
#define AIRWAY_AIRCON1_VS_SWING 0x38
|
||||
|
||||
class AIRWAYHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
AIRWAYHeatpumpIR();
|
||||
void send(IRSender& IR, uint8_t powerModeCmd, uint8_t operatingModeCmd, uint8_t fanSpeedCmd, uint8_t temperatureCmd, uint8_t swingVCmd, uint8_t swingHCmd);
|
||||
|
||||
private:
|
||||
void sendAIRWAY(IRSender& IR, uint8_t powerMode, uint8_t operatingMode, uint8_t fanSpeed, uint8_t temperature, uint8_t swingVCmd, uint8_t swingHCmd);
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue