223 lines
6.2 KiB
C
223 lines
6.2 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2017 - 2018 Realtek Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include "halmac_cfg_wmac_8822c.h"
|
|
|
|
#if HALMAC_8822C_SUPPORT
|
|
|
|
/**
|
|
* cfg_drv_info_8822c() - config driver info
|
|
* @adapter : the adapter of halmac
|
|
* @drv_info : driver information selection
|
|
* Author : KaiYuan Chang/Ivan Lin
|
|
* Return : enum halmac_ret_status
|
|
* More details of status code can be found in prototype document
|
|
*/
|
|
enum halmac_ret_status
|
|
cfg_drv_info_8822c(struct halmac_adapter *adapter,
|
|
enum halmac_drv_info drv_info)
|
|
{
|
|
u8 drv_info_size = 0;
|
|
u8 phy_status_en = 0;
|
|
u8 sniffer_en = 0;
|
|
u8 plcp_hdr_en = 0;
|
|
u32 value32;
|
|
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
|
|
struct halmac_rx_ignore_info *info = &adapter->rx_ignore_info;
|
|
struct halmac_mac_rx_ignore_cfg cfg;
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s ===>\n", __func__);
|
|
PLTFM_MSG_TRACE("[TRACE]drv info = %d\n", drv_info);
|
|
|
|
switch (drv_info) {
|
|
case HALMAC_DRV_INFO_NONE:
|
|
drv_info_size = 0;
|
|
phy_status_en = 0;
|
|
sniffer_en = 0;
|
|
plcp_hdr_en = 0;
|
|
info->hdr_chk_mask = 1;
|
|
info->fcs_chk_mask = 1;
|
|
break;
|
|
case HALMAC_DRV_INFO_PHY_STATUS:
|
|
drv_info_size = 4;
|
|
phy_status_en = 1;
|
|
sniffer_en = 0;
|
|
plcp_hdr_en = 0;
|
|
info->hdr_chk_mask = 1;
|
|
info->fcs_chk_mask = 1;
|
|
break;
|
|
case HALMAC_DRV_INFO_PHY_SNIFFER:
|
|
drv_info_size = 5; /* phy status 4byte, sniffer info 1byte */
|
|
phy_status_en = 1;
|
|
sniffer_en = 1;
|
|
plcp_hdr_en = 0;
|
|
info->hdr_chk_mask = 0;
|
|
info->fcs_chk_mask = 0;
|
|
break;
|
|
case HALMAC_DRV_INFO_PHY_PLCP:
|
|
drv_info_size = 6; /* phy status 4byte, plcp header 2byte */
|
|
phy_status_en = 1;
|
|
sniffer_en = 0;
|
|
plcp_hdr_en = 1;
|
|
info->hdr_chk_mask = 0;
|
|
info->fcs_chk_mask = 0;
|
|
break;
|
|
default:
|
|
return HALMAC_RET_SW_CASE_NOT_SUPPORT;
|
|
}
|
|
|
|
cfg.hdr_chk_en = info->hdr_chk_en;
|
|
cfg.fcs_chk_en = info->fcs_chk_en;
|
|
cfg.cck_rst_en = info->cck_rst_en;
|
|
cfg.fcs_chk_thr = info->fcs_chk_thr;
|
|
api->halmac_set_hw_value(adapter, HALMAC_HW_RX_IGNORE, &cfg);
|
|
|
|
HALMAC_REG_W8(REG_RX_DRVINFO_SZ, drv_info_size);
|
|
|
|
adapter->drv_info_size = drv_info_size;
|
|
|
|
value32 = HALMAC_REG_R32(REG_RCR);
|
|
value32 = (value32 & (~BIT_APP_PHYSTS));
|
|
if (phy_status_en == 1)
|
|
value32 = value32 | BIT_APP_PHYSTS;
|
|
HALMAC_REG_W32(REG_RCR, value32);
|
|
|
|
value32 = HALMAC_REG_R32(REG_WMAC_OPTION_FUNCTION + 4);
|
|
value32 = (value32 & (~(BIT(8) | BIT(9))));
|
|
if (sniffer_en == 1)
|
|
value32 = value32 | BIT(9);
|
|
if (plcp_hdr_en == 1)
|
|
value32 = value32 | BIT(8);
|
|
HALMAC_REG_W32(REG_WMAC_OPTION_FUNCTION + 4, value32);
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s <===\n", __func__);
|
|
|
|
return HALMAC_RET_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* init_low_pwr_8822c() - config WMAC register
|
|
* @adapter
|
|
* Author : KaiYuan Chang/Ivan Lin
|
|
* Return : enum halmac_ret_status
|
|
* More details of status code can be found in prototype document
|
|
*/
|
|
enum halmac_ret_status
|
|
init_low_pwr_8822c(struct halmac_adapter *adapter)
|
|
{
|
|
u16 value16;
|
|
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s ===>\n", __func__);
|
|
|
|
/*RXGCK FIFO threshold CFG*/
|
|
value16 = (HALMAC_REG_R16(REG_RXPSF_CTRL + 2) & 0xF00F);
|
|
value16 |= BIT(10) | BIT(8) | BIT(6) | BIT(4);
|
|
HALMAC_REG_W16(REG_RXPSF_CTRL + 2, value16);
|
|
|
|
/*invalid_pkt CFG*/
|
|
value16 = 0;
|
|
value16 = BIT_SET_RXPSF_PKTLENTHR(value16, 1);
|
|
value16 |= BIT_RXPSF_CTRLEN | BIT_RXPSF_VHTCHKEN | BIT_RXPSF_HTCHKEN
|
|
| BIT_RXPSF_OFDMCHKEN | BIT_RXPSF_CCKCHKEN
|
|
| BIT_RXPSF_OFDMRST | BIT_RXPSF_CCKRST;
|
|
|
|
HALMAC_REG_W16(REG_RXPSF_CTRL, value16);
|
|
HALMAC_REG_W32(REG_RXPSF_TYPE_CTRL, 0xFFFFFFFF);
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s <===\n", __func__);
|
|
|
|
return HALMAC_RET_SUCCESS;
|
|
}
|
|
|
|
void
|
|
cfg_rxgck_fifo_8822c(struct halmac_adapter *adapter, u8 enable)
|
|
{
|
|
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
|
|
|
|
if (enable == 1) {
|
|
if (adapter->hw_cfg_info.trx_mode != HALMAC_TRNSFER_NORMAL)
|
|
PLTFM_MSG_ERR("[ERR]trx_mode != normal\n");
|
|
else
|
|
HALMAC_REG_W8_SET(REG_RXPSF_CTRL + 3, BIT(4));
|
|
} else {
|
|
HALMAC_REG_W8_CLR(REG_RXPSF_CTRL + 3, BIT(4));
|
|
}
|
|
}
|
|
|
|
void
|
|
cfg_rx_ignore_8822c(struct halmac_adapter *adapter,
|
|
struct halmac_mac_rx_ignore_cfg *cfg)
|
|
{
|
|
u16 value16;
|
|
struct halmac_rx_ignore_info *info = &adapter->rx_ignore_info;
|
|
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s ===>\n", __func__);
|
|
|
|
value16 = HALMAC_REG_R16(REG_RXPSF_CTRL);
|
|
|
|
info->hdr_chk_en = cfg->hdr_chk_en;
|
|
info->fcs_chk_en = cfg->fcs_chk_en;
|
|
info->cck_rst_en = cfg->cck_rst_en;
|
|
info->fcs_chk_thr = cfg->fcs_chk_thr;
|
|
|
|
/*mac header check enable*/
|
|
if (cfg->hdr_chk_en == 1 && info->hdr_chk_mask == 1)
|
|
value16 |= BIT_RXPSF_MHCHKEN;
|
|
else
|
|
value16 &= ~(BIT_RXPSF_MHCHKEN);
|
|
|
|
/*continuous FCS error counter enable*/
|
|
if (cfg->fcs_chk_en == 1 && info->fcs_chk_mask == 1)
|
|
value16 |= BIT_RXPSF_CONT_ERRCHKEN;
|
|
else
|
|
value16 &= ~(BIT_RXPSF_CONT_ERRCHKEN);
|
|
|
|
/*MAC Rx reset when CCK enable*/
|
|
if (cfg->cck_rst_en == 1)
|
|
value16 |= BIT_RXPSF_CCKRST;
|
|
else
|
|
value16 &= ~(BIT_RXPSF_CCKRST);
|
|
|
|
/*FCS error counter threshold*/
|
|
value16 = BIT_SET_RXPSF_ERRTHR(value16, cfg->fcs_chk_thr);
|
|
|
|
HALMAC_REG_W16(REG_RXPSF_CTRL, value16);
|
|
|
|
PLTFM_MSG_TRACE("[TRACE]%s <===\n", __func__);
|
|
}
|
|
|
|
void
|
|
cfg_ampdu_8822c(struct halmac_adapter *adapter,
|
|
struct halmac_ampdu_config *cfg)
|
|
{
|
|
u32 ht_max_len;
|
|
u32 vht_max_len;
|
|
struct halmac_api *api = (struct halmac_api *)adapter->halmac_api;
|
|
|
|
HALMAC_REG_W8(REG_PROT_MODE_CTRL + 2, cfg->max_agg_num);
|
|
HALMAC_REG_W8(REG_PROT_MODE_CTRL + 3, cfg->max_agg_num);
|
|
|
|
if (cfg->max_len_en == 1) {
|
|
ht_max_len = cfg->ht_max_len & 0xFFFF;
|
|
vht_max_len = cfg->vht_max_len & 0xFFFFF;
|
|
HALMAC_REG_W32(REG_AMPDU_MAX_LENGTH_HT, ht_max_len);
|
|
HALMAC_REG_W32(REG_AMPDU_MAX_LENGTH_VHT, vht_max_len);
|
|
}
|
|
}
|
|
|
|
#endif /* HALMAC_8822C_SUPPORT */
|