1931 lines
68 KiB
C++
1931 lines
68 KiB
C++
/**
|
||
* @file IRTimer.hpp
|
||
*
|
||
* @brief All timer specific definitions are contained in this file.
|
||
* Sets IR_SEND_PIN if required, e.g. if SEND_PWM_BY_TIMER for AVR is defined, which restricts the output to a dedicated pin number
|
||
*
|
||
* timerConfigForSend(aFrequencyKHz) must set output pin mode and disable receive interrupt if it uses the same resource
|
||
*
|
||
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||
*
|
||
*************************************************************************************
|
||
* MIT License
|
||
*
|
||
* Copyright (c) 2021-2022 Armin Joachimsmeyer
|
||
*
|
||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||
* of this software and associated documentation files (the "Software"), to deal
|
||
* in the Software without restriction, including without limitation the rights
|
||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||
* copies of the Software, and to permit persons to whom the Software is furnished
|
||
* to do so, subject to the following conditions:
|
||
*
|
||
* The above copyright notice and this permission notice shall be included in all
|
||
* copies or substantial portions of the Software.
|
||
*
|
||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
||
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
||
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
|
||
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||
*
|
||
************************************************************************************
|
||
*/
|
||
#ifndef _IR_TIMER_HPP
|
||
#define _IR_TIMER_HPP
|
||
|
||
/** \addtogroup HardwareDependencies CPU / board dependent definitions
|
||
* @{
|
||
*/
|
||
/** \addtogroup Timer Usage of timers for the different CPU / boards
|
||
* @{
|
||
*/
|
||
/*
|
||
* Functions declared here
|
||
*/
|
||
void timerResetInterruptPending();
|
||
void timerEnableReceiveInterrupt();
|
||
void timerDisableReceiveInterrupt();
|
||
void timerConfigForReceive();
|
||
void enableSendPWMByTimer();
|
||
void disableSendPWMByTimer();
|
||
void timerConfigForSend(uint8_t aFrequencyKHz);
|
||
|
||
#if defined(SEND_PWM_BY_TIMER) && ( (defined(ESP32) || defined(ARDUINO_ARCH_RP2040) || defined(PARTICLE)) || defined(ARDUINO_ARCH_MBED) )
|
||
#define SEND_PWM_DOES_NOT_USE_RECEIVE_TIMER // Receive timer and send generation are independent, so it is recommended to always define SEND_PWM_BY_TIMER
|
||
#endif
|
||
|
||
#if defined(IR_SEND_PIN) && defined(SEND_PWM_BY_TIMER) && !defined(SEND_PWM_DOES_NOT_USE_RECEIVE_TIMER) // For e.g ESP32 IR_SEND_PIN definition is useful
|
||
#undef IR_SEND_PIN // avoid warning below, user warning is done at IRremote.hpp
|
||
#endif
|
||
|
||
// Macros for enabling timers for development
|
||
//#define SEND_PWM_BY_TIMER
|
||
//#define IR_USE_AVR_TIMER1
|
||
//#define IR_USE_AVR_TIMER2
|
||
//#define IR_USE_AVR_TIMER3
|
||
//#define IR_USE_AVR_TIMER4
|
||
//#define IR_USE_AVR_TIMER4_HS
|
||
//#define IR_USE_AVR_TIMER5
|
||
//#define IR_USE_AVR_TIMER_TINY0
|
||
//#define IR_USE_AVR_TIMER_TINY1
|
||
//#define IR_USE_AVR_TIMER_A
|
||
//#define IR_USE_AVR_TIMER_B
|
||
//#define IR_USE_AVR_TIMER_D
|
||
//#define __MK20DX128__
|
||
//#define __MKL26Z64__
|
||
//#define __IMXRT1062__
|
||
//#define ESP8266
|
||
//#define ESP32
|
||
//#define ARDUINO_ARCH_SAMD
|
||
//#define ARDUINO_ARCH_MBED
|
||
//#define ARDUINO_ARCH_RP2040
|
||
//#define NRF5
|
||
//#define __STM32F1__
|
||
//#define STM32F1xx
|
||
//#define PARTICLE
|
||
|
||
#if defined (DOXYGEN)
|
||
/**
|
||
* Hardware / timer dependent pin number for sending IR if SEND_PWM_BY_TIMER is defined. Otherwise used as default for IrSender.sendPin.
|
||
*/
|
||
#define IR_SEND_PIN
|
||
|
||
/**
|
||
* Configures the timer to be able to generate the receive sample interrupt,
|
||
* which consumes a small amount of CPU every 50 (MICROS_PER_TICK) us.
|
||
* The actual interrupt generation is controlled by timerEnableReceiveInterrupt() and timerDisableReceiveInterrupt().
|
||
* timerConfigForReceive() is used exclusively by IRrecv::start()
|
||
*/
|
||
void timerConfigForReceive() {
|
||
}
|
||
/**
|
||
* Enables the receive sample timer interrupt, which consumes a small amount of CPU every 50 us.
|
||
*/
|
||
void timerEnableReceiveInterrupt() {
|
||
}
|
||
|
||
/**
|
||
* Disables the receive sample timer interrupt. This must be done before using the timer for e.g. tone().
|
||
* Is a synonym for calling end() or stop().
|
||
*/
|
||
void timerDisableReceiveInterrupt() {
|
||
}
|
||
|
||
/**
|
||
* IF PWM should be generated not by software, but by a timer, this function sets output pin mode,
|
||
* configures the timer for generating a PWM with duty cycle of IR_SEND_DUTY_CYCLE_PERCENT
|
||
* and disables the receive interrupt if it uses the same resource.
|
||
* For most architectures, the pin number(s) which can be used for output is determined by the timer used!
|
||
* The output of the PWM signal is controlled by enableSendPWMByTimer() and disableSendPWMByTimer().
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut().
|
||
* @param aFrequencyKHz Frequency of the sent PWM signal in kHz. There is no practical reason to have a sub kHz resolution for sending frequency :-).
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
}
|
||
|
||
/**
|
||
* Enables output of the PWM signal of the timer at the timer pin.
|
||
*/
|
||
void enableSendPWMByTimer() {
|
||
}
|
||
/**
|
||
* Disables output of the PWM signal of the timer at the timer pin and set it to inactive.
|
||
*/
|
||
void disableSendPWMByTimer() {
|
||
}
|
||
|
||
#elif defined(__AVR__)
|
||
/**********************************************************************************************************************
|
||
* Mapping of AVR boards to AVR timers
|
||
* For some CPU's you have the option to switch the timer and the hardware send pin
|
||
**********************************************************************************************************************/
|
||
/***************************************
|
||
* Plain AVR CPU's, no boards
|
||
***************************************/
|
||
// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
|
||
#if defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328PB__) || defined(__AVR_ATmega168__) \
|
||
|| defined(__AVR_ATmega88P__) || defined(__AVR_ATmega88PB__) || defined(__AVR_ATmega8__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER2)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 9
|
||
#define IR_USE_AVR_TIMER2 // send pin = pin 3
|
||
# endif
|
||
|
||
// Arduino Mega
|
||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER2) && !defined(IR_USE_AVR_TIMER3) && !defined(IR_USE_AVR_TIMER4) && !defined(IR_USE_AVR_TIMER5)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 11
|
||
#define IR_USE_AVR_TIMER2 // send pin = pin 9
|
||
//#define IR_USE_AVR_TIMER3 // send pin = pin 5
|
||
//#define IR_USE_AVR_TIMER4 // send pin = pin 6
|
||
//#define IR_USE_AVR_TIMER5 // send pin = pin 46
|
||
# endif
|
||
|
||
// Leonardo
|
||
#elif defined(__AVR_ATmega32U4__) && ! defined(TEENSYDUINO) && ! defined(ARDUINO_AVR_PROMICRO)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER3) && !defined(IR_USE_AVR_TIMER4_HS)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 9
|
||
#define IR_USE_AVR_TIMER3 // send pin = pin 5
|
||
//#define IR_USE_AVR_TIMER4_HS // send pin = pin 13
|
||
# endif
|
||
|
||
// Nano Every, Uno WiFi Rev2 and similar
|
||
#elif defined(__AVR_ATmega808__) || defined(__AVR_ATmega809__) || defined(__AVR_ATmega3208__) || defined(__AVR_ATmega3209__) \
|
||
|| defined(__AVR_ATmega1608__) || defined(__AVR_ATmega1609__) || defined(__AVR_ATmega4808__) || defined(__AVR_ATmega4809__) || defined(__AVR_ATtiny1604__)
|
||
# if !defined(IR_USE_AVR_TIMER_B)
|
||
#define IR_USE_AVR_TIMER_B // send pin = pin 6 on ATmega4809 1 on ATmega4809
|
||
# endif
|
||
|
||
#elif defined(__AVR_ATtiny816__) || defined(__AVR_ATtiny1614__) || defined(__AVR_ATtiny1616__) || defined(__AVR_ATtiny3216__) || defined(__AVR_ATtiny3217__) // e.g. TinyCore boards
|
||
# if !defined(IR_USE_AVR_TIMER_A) && !defined(IR_USE_AVR_TIMER_D)
|
||
#define IR_USE_AVR_TIMER_A // use this if you use MegaTinyCore, Tone is on TCB and millis() on TCD
|
||
//#define IR_USE_AVR_TIMER_D // use this if you use TinyCore
|
||
# endif
|
||
|
||
// ATmega8u2, ATmega16U2, ATmega32U2
|
||
#elif defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin C6
|
||
# endif
|
||
|
||
// ATtiny84
|
||
#elif defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny88__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin 6
|
||
# endif
|
||
|
||
#elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin PB1 / 8
|
||
# endif
|
||
#define USE_TIMER_CHANNEL_B
|
||
|
||
//ATtiny85, 45, 25
|
||
#elif defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
|
||
# if !defined(IR_USE_AVR_TIMER_TINY0) && !defined(IR_USE_AVR_TIMER_TINY1)
|
||
# if defined(ARDUINO_AVR_DIGISPARK) // tested with 16 and 8 MHz
|
||
#define IR_USE_AVR_TIMER_TINY0 // send pin = pin 1
|
||
// standard Digispark settings use timer 1 for millis() and micros()
|
||
# else
|
||
// standard ATTinyCore settings use timer 0 for millis() and micros()
|
||
#define IR_USE_AVR_TIMER_TINY1 // send pin = pin 4
|
||
# endif
|
||
# endif
|
||
|
||
/***************************************
|
||
* SPARKFUN Pro Micro board
|
||
***************************************/
|
||
#elif defined(ARDUINO_AVR_PROMICRO)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER3) && !defined(IR_USE_AVR_TIMER4_HS)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 9
|
||
#define IR_USE_AVR_TIMER3 // send pin = pin 5
|
||
//#define IR_USE_AVR_TIMER4_HS // send pin = pin 13
|
||
# endif
|
||
|
||
/***************************************
|
||
* TEENSY Boards
|
||
***************************************/
|
||
// Teensy 1.0
|
||
#elif defined(__AVR_AT90USB162__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin 17
|
||
# endif
|
||
|
||
// Teensy++ 1.0 & 2.0
|
||
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER2) && !defined(IR_USE_AVR_TIMER3)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 25
|
||
#define IR_USE_AVR_TIMER2 // send pin = pin 1
|
||
//#define IR_USE_AVR_TIMER3 // send pin = pin 16
|
||
# endif
|
||
|
||
// Teensy 2.0
|
||
#elif defined(__AVR_ATmega32U4__) && defined(TEENSYDUINO)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER3) && !defined(IR_USE_AVR_TIMER4_HS)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 14 (Teensy 2.0 - physical pin: B5)
|
||
//#define IR_USE_AVR_TIMER3 // send pin = pin 9 (Teensy 2.0 - physical pin: C6)
|
||
#define IR_USE_AVR_TIMER4_HS // send pin = pin 10 (Teensy 2.0 - physical pin: C7)
|
||
# endif
|
||
|
||
/***************************************
|
||
* CPU's with MegaCore
|
||
***************************************/
|
||
// MegaCore - ATmega64, ATmega128
|
||
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2560__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin 13
|
||
# endif
|
||
|
||
/***************************************
|
||
* CPU's with MajorCore
|
||
***************************************/
|
||
#elif defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER3)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin 13
|
||
//#define IR_USE_AVR_TIMER3 // send pin = pin 12 - ATmega162 only
|
||
# endif
|
||
|
||
/***************************************
|
||
* CPU's with MightyCore
|
||
***************************************/
|
||
// MightyCore - ATmega1284
|
||
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER2) && !defined(IR_USE_AVR_TIMER3)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 13
|
||
#define IR_USE_AVR_TIMER2 // send pin = pin 14
|
||
//#define IR_USE_AVR_TIMER3 // send pin = pin 6
|
||
# endif
|
||
|
||
// MightyCore - ATmega164, ATmega324, ATmega644
|
||
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||
|| defined(__AVR_ATmega164P__)
|
||
# if !defined(IR_USE_AVR_TIMER1) && !defined(IR_USE_AVR_TIMER2)
|
||
//#define IR_USE_AVR_TIMER1 // send pin = pin 13
|
||
#define IR_USE_AVR_TIMER2 // send pin = pin 14
|
||
# endif
|
||
|
||
// MightyCore - ATmega8535, ATmega16, ATmega32
|
||
#elif defined(__AVR_ATmega8535__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__)
|
||
# if !defined(IR_USE_AVR_TIMER1)
|
||
#define IR_USE_AVR_TIMER1 // send pin = pin 13
|
||
# endif
|
||
|
||
#endif // AVR CPU's
|
||
/**********************************************************************************************************************
|
||
* End of AVR mapping, start of AVR timers
|
||
**********************************************************************************************************************/
|
||
/*
|
||
* AVR Timer1 (16 bits)
|
||
*/
|
||
#if defined(IR_USE_AVR_TIMER1)
|
||
|
||
# if defined(TIMSK1)
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK1 = _BV(OCIE1A); // Timer/Counter1, Output Compare A Match Interrupt Enable
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK1 &= ~_BV(OCIE1A);
|
||
}
|
||
# else
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK |= _BV(OCIE1A);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK &= ~_BV(OCIE1A);
|
||
}
|
||
# endif
|
||
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
# if defined(TIMER1_COMPB_vect)
|
||
#define TIMER_INTR_NAME TIMER1_COMPB_vect
|
||
# elif defined(TIM1_COMPB_vect)
|
||
#define TIMER_INTR_NAME TIM1_COMPB_vect
|
||
# endif
|
||
#else
|
||
# if defined(TIMER1_COMPA_vect)
|
||
#define TIMER_INTR_NAME TIMER1_COMPA_vect
|
||
# elif defined(TIM1_COMPA_vect)
|
||
#define TIMER_INTR_NAME TIM1_COMPA_vect
|
||
# endif
|
||
# endif
|
||
|
||
void timerConfigForReceive() {
|
||
TCCR1A = 0;
|
||
TCCR1B = _BV(WGM12) | _BV(CS10); // CTC mode, no prescaling
|
||
OCR1A = (F_CPU * MICROS_PER_TICK) / MICROS_IN_ONE_SECOND; // 16 * 50 = 800
|
||
TCNT1 = 0;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC1A_PIN)
|
||
#define IR_SEND_PIN CORE_OC1A_PIN // Teensy
|
||
|
||
# elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
#define IR_SEND_PIN 11 // Arduino Mega
|
||
|
||
// MightyCore, MegaCore, MajorCore
|
||
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|
||
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
|
||
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) \
|
||
|| defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) \
|
||
|| defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
|
||
#define IR_SEND_PIN 13
|
||
|
||
# elif defined(__AVR_ATtiny84__)
|
||
#define IR_SEND_PIN 6
|
||
|
||
# elif defined(__AVR_ATtiny88__)
|
||
#define IR_SEND_PIN 8
|
||
|
||
# elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__)
|
||
/*
|
||
* !!! IR_SEND_PIN value must correspond to ENABLE_SEND_PWM_BY_TIMER below !!!
|
||
*/
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
#define IR_SEND_PIN PIN_PB1 // OC1BU / PB1 / Pin9 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB3 // OC1BV / PB3 / Pin11 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB5 // OC1BW / PB5 / Pin13 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB7 // OC1BX / PB7 / Pin15 at ATTinyCore
|
||
# else
|
||
#define IR_SEND_PIN PIN_PB0 // OC1AU / PB1 / Pin8 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB2 // OC1AV / PB3 / Pin10 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB4 // OC1AW / PB5 / Pin12 at ATTinyCore
|
||
//#define IR_SEND_PIN PIN_PB6 // OC1AX / PB6 / Pin14 at ATTinyCore
|
||
# endif
|
||
|
||
# else
|
||
#define IR_SEND_PIN 9 // OC1A Arduino Duemilanove, Diecimila, LilyPad, Sparkfun Pro Micro, Leonardo, MH-ET Tiny88 etc.
|
||
# endif // defined(CORE_OC1A_PIN)
|
||
|
||
# if defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__)
|
||
// Clear OC1A/OC1B on Compare Match when up-counting. Set OC1A/OC1B on Compare Match when down counting.
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
void enableSendPWMByTimer() {
|
||
TCNT1 = 0;
|
||
TCCR1A |= _BV(COM1B1);
|
||
TCCR1D |= _BV(OC1BU); // + enable OC1BU as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1B1); TCCR1D |= _BV(OC1BV); // + enable OC1BV as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1B1); TCCR1D |= _BV(OC1BW); // + enable OC1BW as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1B1); TCCR1D |= _BV(OC1BX); // + enable OC1BX as output
|
||
}
|
||
# else
|
||
void disableSendPWMByTimer() {
|
||
TCNT1 = 0;
|
||
TCCR1A |= _BV(COM1A1);
|
||
TCCR1D |= _BV(OC1AU); // + enable OC1BU as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1A1); TCCR1D |= _BV(OC1AV); // + enable OC1BV as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1A1); TCCR1D |= _BV(OC1AW); // + enable OC1BW as output
|
||
//TCNT1 = 0; TCCR1A |= _BV(COM1A1); TCCR1D |= _BV(OC1AX); // + enable OC1BX as output
|
||
}
|
||
|
||
# endif
|
||
void disableSendPWMByTimer() {
|
||
TCCR1D = 0;
|
||
}
|
||
# else
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
void enableSendPWMByTimer() {
|
||
TCNT1 = 0; (TCCR1A |= _BV(COM1B1)) // Clear OC1A/OC1B on Compare Match when up-counting. Set OC1A/OC1B on Compare Match when downcounting.
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR1A &= ~(_BV(COM1B1));
|
||
}
|
||
# else
|
||
void enableSendPWMByTimer() {
|
||
TCNT1 = 0;
|
||
TCCR1A |= _BV(COM1A1); // Clear OC1A/OC1B on Compare Match when up-counting. Set OC1A/OC1B on Compare Match when downcounting.
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR1A &= ~(_BV(COM1A1));
|
||
}
|
||
# endif
|
||
# endif
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
|
||
# if (((F_CPU / 2000) / 38) < 256)
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR1A = _BV(WGM11); // PWM, Phase Correct, Top is ICR1
|
||
TCCR1B = _BV(WGM13) | _BV(CS10); // CS10 -> no prescaling
|
||
ICR1 = tPWMWrapValue - 1;
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
OCR1B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
# else
|
||
OCR1A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
# endif
|
||
TCNT1 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
# else
|
||
const uint16_t tPWMWrapValue = ((F_CPU / 8) / 2000) / (aFrequencyKHz); // 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR1A = _BV(WGM11);// PWM, Phase Correct, Top is ICR1
|
||
TCCR1B = _BV(WGM13) | _BV(CS11);// CS11 -> Prescaling by 8
|
||
ICR1 = tPWMWrapValue - 1;
|
||
# if defined(USE_TIMER_CHANNEL_B)
|
||
OCR1A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
# else
|
||
OCR1A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
# endif
|
||
TCNT1 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
# endif
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer2 (8 bits) // Tone timer on UNO
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER2)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK2 = _BV(OCIE2B); // Output Compare Match A Interrupt Enable
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK2 = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TIMER2_COMPB_vect // We use TIMER2_COMPB_vect to be compatible with tone() library
|
||
|
||
#define TIMER_COUNT_TOP (F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND)
|
||
|
||
void timerConfigForReceive() {
|
||
# if (TIMER_COUNT_TOP < 256)
|
||
TCCR2A = _BV(WGM21);
|
||
TCCR2B = _BV(CS20);
|
||
OCR2A = TIMER_COUNT_TOP;
|
||
OCR2B = TIMER_COUNT_TOP;
|
||
TCNT2 = 0;
|
||
# else
|
||
TCCR2A = _BV(WGM21);
|
||
TCCR2B = _BV(CS21);
|
||
OCR2A = TIMER_COUNT_TOP / 8;
|
||
OCR2B = TIMER_COUNT_TOP / 8;
|
||
TCNT2 = 0;
|
||
# endif
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC2B_PIN)
|
||
#define IR_SEND_PIN CORE_OC2B_PIN // Teensy
|
||
|
||
# elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
#define IR_SEND_PIN 9 // Arduino Mega
|
||
|
||
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||
|| defined(__AVR_ATmega164P__)
|
||
#define IR_SEND_PIN 14 // MightyCore, MegaCore
|
||
|
||
# else
|
||
#define IR_SEND_PIN 3 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
||
# endif // defined(CORE_OC2B_PIN)
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT2 = 0;
|
||
TCCR2A |= _BV(COM2B1); // Clear OC2B on Compare Match
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR2A &= ~(_BV(COM2B1)); // Normal port operation, OC2B disconnected.
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
|
||
# if (((F_CPU / 2000) / 38) < 256)
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR2A = _BV(WGM20); // PWM, Phase Correct, Top is OCR2A
|
||
TCCR2B = _BV(WGM22) | _BV(CS20); // CS20 -> no prescaling
|
||
OCR2A = tPWMWrapValue - 1; // The top value for the timer. The modulation frequency will be F_CPU / 2 / OCR2A.
|
||
OCR2B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT2 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
# else
|
||
const uint16_t tPWMWrapValue = ((F_CPU / 8) / 2000) / (aFrequencyKHz); // 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR2A = _BV(WGM20);// PWM, Phase Correct, Top is OCR2A
|
||
TCCR2B = _BV(WGM22) | _BV(CS21);// CS21 -> Prescaling by 8
|
||
OCR2A = tPWMWrapValue - 1;
|
||
OCR2B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT2 = 0;// not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
# endif
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer3 (16 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER3)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK3 = _BV(OCIE3B);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK3 = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TIMER3_COMPB_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCCR3A = 0;
|
||
TCCR3B = _BV(WGM32) | _BV(CS30);
|
||
OCR3A = F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND;
|
||
OCR3B = F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND;
|
||
TCNT3 = 0;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC3A_PIN)
|
||
#define IR_SEND_PIN CORE_OC3A_PIN // Teensy
|
||
|
||
# elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) \
|
||
|| defined(__AVR_ATmega32U4__) || defined(ARDUINO_AVR_PROMICRO)
|
||
#define IR_SEND_PIN 5 // Arduino Mega, Arduino Leonardo, Sparkfun Pro Micro
|
||
|
||
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
|
||
#define IR_SEND_PIN 6 // MightyCore, MegaCore
|
||
|
||
# else
|
||
#error Please add OC3A pin number here
|
||
# endif
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT3 = 0;
|
||
TCCR3A |= _BV(COM3A1);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR3A &= ~(_BV(COM3A1));
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
#error "Creating timer PWM with timer 3 is not supported for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR3A = _BV(WGM31);
|
||
TCCR3B = _BV(WGM33) | _BV(CS30); // PWM, Phase Correct, ICRn as TOP, complete period is double of tPWMWrapValue
|
||
ICR3 = tPWMWrapValue - 1;
|
||
OCR3A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT3 = 0; // required, since we have an 16 bit counter
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer4 (16 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER4)
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK4 = _BV(OCIE4A);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK4 = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TIMER4_COMPA_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCCR4A = 0;
|
||
TCCR4B = _BV(WGM42) | _BV(CS40);
|
||
OCR4A = F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND;
|
||
TCNT4 = 0;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC4A_PIN)
|
||
#define IR_SEND_PIN CORE_OC4A_PIN
|
||
# elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
#define IR_SEND_PIN 6 // Arduino Mega
|
||
# else
|
||
#error Please add OC4A pin number here
|
||
# endif
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT4 = 0;
|
||
TCCR4A |= _BV(COM4A1);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR4A &= ~(_BV(COM4A1));
|
||
}
|
||
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
#error "Creating timer PWM with timer 4 is not supported for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR4A = _BV(WGM41);
|
||
TCCR4B = _BV(WGM43) | _BV(CS40);
|
||
ICR4 = tPWMWrapValue - 1;
|
||
OCR4A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT4 = 0; // required, since we have an 16 bit counter
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer4 (10 bits, high speed option)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER4_HS)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK4 = _BV(TOIE4);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK4 = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TIMER4_OVF_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCCR4A = 0;
|
||
TCCR4B = _BV(CS40);
|
||
TCCR4C = 0;
|
||
TCCR4D = 0;
|
||
TCCR4E = 0;
|
||
TC4H = (F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND) >> 8;
|
||
OCR4C = (F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND) & 255;
|
||
TC4H = 0;
|
||
TCNT4 = 0;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC4A_PIN)
|
||
#define IR_SEND_PIN CORE_OC4A_PIN // Teensy 2.0
|
||
# elif defined(ARDUINO_AVR_PROMICRO)
|
||
#define IR_SEND_PIN 5 // Sparkfun Pro Micro
|
||
# elif defined(__AVR_ATmega32U4__)
|
||
#define IR_SEND_PIN 13 // Leonardo
|
||
# else
|
||
#error Please add OC4A pin number here
|
||
# endif
|
||
|
||
# if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro
|
||
void enableSendPWMByTimer() { TCNT4 = 0; (TCCR4A |= _BV(COM4A0)) // Use complementary OC4A output on pin 5
|
||
void disableSendPWMByTimer() { (TCCR4A &= ~(_BV(COM4A0))) // (Pro Micro does not map PC7 (32/ICP3/CLK0/OC4A)
|
||
// of ATmega32U4 )
|
||
# else
|
||
void enableSendPWMByTimer() {
|
||
TCNT4 = 0;
|
||
TCCR4A |= _BV(COM4A1);
|
||
DDRC |= 1 << 7;
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR4A &= ~(_BV(COM4A1));
|
||
}
|
||
# endif
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
#error "Creating timer PWM with timer 4 HS is not supported for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = ((F_CPU / 2000) / (aFrequencyKHz)) - 1; // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR4A = (1 << PWM4A);
|
||
TCCR4B = _BV(CS40);
|
||
TCCR4C = 0;
|
||
TCCR4D = (1 << WGM40);
|
||
TCCR4E = 0;
|
||
TC4H = tPWMWrapValue >> 8;
|
||
OCR4C = tPWMWrapValue;
|
||
TC4H = (tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT / 100) >> 8;
|
||
OCR4A = (tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT / 100) & 255;
|
||
TCNT4 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer5 (16 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER5)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK5 = _BV(OCIE5A);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK5 = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TIMER5_COMPA_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCCR5A = 0;
|
||
TCCR5B = _BV(WGM52) | _BV(CS50);
|
||
OCR5A = F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND;
|
||
TCNT5 = 0;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(CORE_OC5A_PIN)
|
||
#define IR_SEND_PIN CORE_OC5A_PIN
|
||
# elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||
#define IR_SEND_PIN 46 // Arduino Mega
|
||
# else
|
||
#error Please add OC5A pin number here
|
||
# endif
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT5 = 0;
|
||
TCCR5A |= _BV(COM5A1);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR5A &= ~(_BV(COM5A1));
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
#error "Creating timer PWM with timer 5 is not supported for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR5A = _BV(WGM51);
|
||
TCCR5B = _BV(WGM53) | _BV(CS50);
|
||
ICR5 = tPWMWrapValue - 1;
|
||
OCR5A = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT5 = 0; // required, since we have an 16 bit counter
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer0 for ATtinies (8 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER_TINY0)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK |= _BV(OCIE0A);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK &= ~(_BV(OCIE0A));
|
||
}
|
||
#define TIMER_INTR_NAME TIMER0_COMPA_vect
|
||
|
||
#define TIMER_COUNT_TOP (F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND)
|
||
|
||
void timerConfigForReceive() {
|
||
# if (TIMER_COUNT_TOP < 256)
|
||
TCCR0A = _BV(WGM01); // CTC, Top is OCR0A
|
||
TCCR0B = _BV(CS00);// No prescaling
|
||
OCR0A = TIMER_COUNT_TOP;
|
||
TCNT0 = 0;
|
||
# else
|
||
TCCR0A = _BV(WGM01);
|
||
TCCR0B = _BV(CS01); // prescaling by 8
|
||
OCR0A = TIMER_COUNT_TOP / 8;
|
||
TCNT0 = 0;
|
||
# endif
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 1
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT0 = 0;
|
||
TCCR0A |= _BV(COM0B1);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCCR0A &= ~(_BV(COM0B1));
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
#error "Creating timer PWM with timer TINY0 is not supported for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of Phase Correct PWM
|
||
TCCR0A = _BV(WGM00); // PWM, Phase Correct, Top is OCR0A
|
||
TCCR0B = _BV(WGM02) | _BV(CS00); // CS00 -> no prescaling
|
||
OCR0A = tPWMWrapValue - 1;
|
||
OCR0B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT0 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR Timer1 for ATtinies (8 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER_TINY1)
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
TIMSK |= _BV(OCIE1B);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TIMSK &= ~(_BV(OCIE1B));
|
||
}
|
||
#define TIMER_INTR_NAME TIMER1_COMPB_vect
|
||
|
||
#define TIMER_COUNT_TOP (F_CPU * MICROS_PER_TICK / MICROS_IN_ONE_SECOND)
|
||
|
||
void timerConfigForReceive() {
|
||
# if (TIMER_COUNT_TOP < 256)
|
||
TCCR1 = _BV(CTC1) | _BV(CS10); // Clear Timer/Counter on Compare Match, Top is OCR1C, No prescaling
|
||
GTCCR = 0;// normal, non-PWM mode
|
||
OCR1C = TIMER_COUNT_TOP;
|
||
TCNT1 = 0;
|
||
# else
|
||
TCCR1 = _BV(CTC1) | _BV(CS12); // Clear Timer/Counter on Compare Match, Top is OCR1C, prescaling by 8
|
||
GTCCR = 0; // normal, non-PWM mode
|
||
OCR1C = TIMER_COUNT_TOP / 8;
|
||
TCNT1 = 0;
|
||
# endif
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 4
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCNT1 = 0;
|
||
GTCCR |= _BV(PWM1B) | _BV(COM1B0); // Enable pin 4 PWM output (PB4 - Arduino D4)
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
GTCCR &= ~(_BV(PWM1B) | _BV(COM1B0));
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
|
||
# if (((F_CPU / 1000) / 38) < 256)
|
||
const uint16_t tPWMWrapValue = (F_CPU / 1000) / (aFrequencyKHz); // 421 @16 MHz, 26 @1 MHz and 38 kHz
|
||
TCCR1 = _BV(CTC1) | _BV(CS10);// CTC1 = 1: TOP value set to OCR1C, CS10 No Prescaling
|
||
OCR1C = tPWMWrapValue - 1;
|
||
OCR1B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT1 = 0;// not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
GTCCR = _BV(PWM1B) | _BV(COM1B0);// PWM1B = 1: Enable PWM for OCR1B, COM1B0 Clear on compare match
|
||
# else
|
||
const uint16_t tPWMWrapValue = ((F_CPU / 2) / 1000) / (aFrequencyKHz); // 210 for 16 MHz and 38 kHz
|
||
TCCR1 = _BV(CTC1) | _BV(CS11); // CTC1 = 1: TOP value set to OCR1C, CS11 Prescaling by 2
|
||
OCR1C = tPWMWrapValue - 1;
|
||
OCR1B = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1;
|
||
TCNT1 = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
GTCCR = _BV(PWM1B) | _BV(COM1B0); // PWM1B = 1: Enable PWM for OCR1B, COM1B0 Clear on compare match
|
||
# endif
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR TimerA for TinyCore 32 (16 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER_A)
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
TCA0.SINGLE.INTFLAGS = TCA_SINGLE_OVF_bm;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
TCA0.SINGLE.INTCTRL = TCA_SINGLE_OVF_bm;
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TCA0.SINGLE.INTCTRL &= ~(TCA_SINGLE_OVF_bm);
|
||
}
|
||
#define TIMER_INTR_NAME TCA0_OVF_vect
|
||
// For MegaTinyCore:
|
||
// TCB1 is used by Tone()
|
||
// TCB2 is used by Servo, but we cannot hijack the ISR, so we must use a dedicated timer for the 20 ms interrupt
|
||
// TCB3 is used by millis()
|
||
// Must use TCA0, since TCBx have only prescaler %2. Use single (16bit) mode, because it seems to be easier :-)
|
||
void timerConfigForReceive() {
|
||
TCA0.SINGLE.CTRLD = 0; // Single mode - required at least for MegaTinyCore
|
||
TCA0.SINGLE.CTRLB = TCA_SINGLE_WGMODE_NORMAL_gc; // Normal mode, top = PER
|
||
TCA0.SINGLE.PER = (F_CPU / MICROS_IN_ONE_SECOND) * MICROS_PER_TICK; // 800 at 16 MHz
|
||
TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc | TCA_SINGLE_ENABLE_bm; // set prescaler to 1 and enable timer
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error "No support for hardware PWM generation for ATtiny3216/17 etc."
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR TimerB (8 bits) for ATmega4809 (Nano Every, Uno WiFi Rev2)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER_B)
|
||
|
||
// ATmega4809 TCB0
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
TCB0.INTFLAGS = TCB_CAPT_bm;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
TCB0.INTCTRL = TCB_CAPT_bm;
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TCB0.INTCTRL &= ~(TCB_CAPT_bm);
|
||
}
|
||
#define TIMER_INTR_NAME TCB0_INT_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCB0.CTRLB = (TCB_CNTMODE_INT_gc); // Periodic interrupt mode
|
||
TCB0.CCMP = ((F_CPU * MICROS_PER_TICK) / MICROS_IN_ONE_SECOND);
|
||
TCB0.INTFLAGS = TCB_CAPT_bm; // reset interrupt flags
|
||
TCB0.CTRLA = (TCB_CLKSEL_CLKDIV1_gc) | (TCB_ENABLE_bm);
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(__AVR_ATmega4808__) || defined(__AVR_ATmega4809__)
|
||
#define IR_SEND_PIN 6 // PF4 on ATmega4809 / Nano Every (see pins_arduino.h digital_pin_to_timer)
|
||
# else
|
||
#error SEND_PWM_BY_TIMER not yet supported for this CPU
|
||
# endif
|
||
|
||
void enableSendPWMByTimer() {
|
||
TCB0.CNT = 0;
|
||
TCB0.CTRLB |= TCB_CCMPEN_bm; // set Compare/Capture Output Enable
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCB0.CTRLB &= ~(TCB_CCMPEN_bm);
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
#if F_CPU > 16000000
|
||
// we have only prescaler 2 or must take clock of timer A (which is non deterministic)
|
||
#error "Creating timer PWM with timer TCB0 is not possible for F_CPU > 16 MHz"
|
||
#endif
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = (F_CPU / 2000) / (aFrequencyKHz); // 210,52 for 38 kHz @16 MHz clock, 2000 instead of 1000 because of using CLK / 2
|
||
TCB0.CTRLB = TCB_CNTMODE_PWM8_gc; // 8 bit PWM mode
|
||
TCB0.CCMPL = tPWMWrapValue - 1; // Period of 8 bit PWM
|
||
TCB0.CCMPH = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1; // Duty cycle of waveform of 8 bit PWM
|
||
TCB0.CTRLA = (TCB_CLKSEL_CLKDIV2_gc) | (TCB_ENABLE_bm); // use CLK / 2
|
||
TCB0.CNT = 0; // not really required, since we have an 8 bit counter, but makes the signal more reproducible
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*
|
||
* AVR TimerD for TinyCore 32 (16 bits)
|
||
*/
|
||
#elif defined(IR_USE_AVR_TIMER_D)
|
||
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
TCD0.INTFLAGS = TCD_OVF_bm;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
TCD0.INTCTRL = TCD_OVF_bm;
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
TCD0.INTCTRL = 0;
|
||
}
|
||
#define TIMER_INTR_NAME TCD0_OVF_vect
|
||
|
||
void timerConfigForReceive() {
|
||
TCD0.CTRLA = 0; // reset enable bit in order to unprotect the other bits
|
||
TCD0.CTRLB = TCD_WGMODE_ONERAMP_gc; // must be set since it is used by PWM
|
||
// TCD0.CMPBSET = 80;
|
||
TCD0.CMPBCLR = ((F_CPU * MICROS_PER_TICK) / MICROS_IN_ONE_SECOND) - 1;
|
||
|
||
_PROTECTED_WRITE(TCD0.FAULTCTRL, 0); // must disable WOA output at pin 13/PA4
|
||
|
||
TCD0.INTFLAGS = TCD_OVF_bm; // reset interrupt flags
|
||
// check enable ready
|
||
// while ((TCD0.STATUS & TCD_ENRDY_bm) == 0); // Wait for Enable Ready to be high - I guess it is not required
|
||
// enable timer - this locks the other bits and static registers and activates values in double buffered registers
|
||
TCD0.CTRLA = TCD_ENABLE_bm | TCD_CLKSEL_SYSCLK_gc | TCD_CNTPRES_DIV1_gc; // System clock, no prescale, no synchronization prescaler
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 13
|
||
|
||
void timerEnableSendPWM() {
|
||
TCD0.CTRLA = 0; // reset enable bit in order to unprotect the other bits
|
||
_PROTECTED_WRITE(TCD0.FAULTCTRL, FUSE_CMPAEN_bm); // enable WOA output at pin 13/PA4
|
||
// _PROTECTED_WRITE(TCD0.FAULTCTRL, FUSE_CMPAEN_bm | FUSE_CMPBEN_bm); // enable WOA + WOB output pins at 13/PA4 + 14/PA5
|
||
TCD0.CTRLA = TCD_ENABLE_bm | TCD_CLKSEL_SYSCLK_gc | TCD_CNTPRES_DIV1_gc; // System clock, no prescale, no synchronization prescaler
|
||
}
|
||
|
||
void enableSendPWMByTimer() {
|
||
timerEnableSendPWM();
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
TCD0.CTRLA = 0; // do not disable output, disable complete timer
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
|
||
const uint16_t tPWMWrapValue = (F_CPU / 1000) / (aFrequencyKHz); // 526,31 for 38 kHz @20 MHz clock
|
||
// use one ramp mode and overflow interrupt
|
||
TCD0.CTRLA = 0; // reset enable bit in order to unprotect the other bits
|
||
// while ((TCD0.STATUS & TCD_ENRDY_bm) == 0); // Wait for Enable Ready to be high - I guess it is not required
|
||
TCD0.CTRLB = TCD_WGMODE_ONERAMP_gc; // must be set since it is used by PWM
|
||
TCD0.CTRLC = 0; // reset WOx output settings
|
||
// TCD0.CMPBSET = 80;
|
||
TCD0.CMPBCLR = tPWMWrapValue - 1;
|
||
|
||
// Generate duty cycle signal for debugging etc.
|
||
TCD0.CMPASET = 0;
|
||
TCD0.CMPACLR = (tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT / 100) - 1; // duty cycle for WOA
|
||
|
||
TCD0.INTFLAGS = TCD_OVF_bm; // reset interrupt flags
|
||
TCD0.INTCTRL = TCD_OVF_bm; // overflow interrupt
|
||
// Do not enable timer, this is done at timerEnablSendPWM()
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
#else
|
||
#error Internal code configuration error, no timer functions implemented for this AVR CPU / board
|
||
#endif //defined(IR_USE_AVR_TIMER*)
|
||
/**********************************************************************************************************************
|
||
* End of AVR timers
|
||
**********************************************************************************************************************/
|
||
|
||
/**********************************************
|
||
* Teensy 3.0 / Teensy 3.1 / Teensy 3.2 boards
|
||
**********************************************/
|
||
#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
|
||
|
||
// Special carrier modulator timer for Teensy 3.0 / Teensy 3.1 / Teensy 3.2
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
uint8_t tmp __attribute__((unused)) = CMT_MSC;
|
||
CMT_CMD2 = 30;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
NVIC_ENABLE_IRQ(IRQ_CMT);
|
||
NVIC_SET_PRIORITY(IRQ_CMT, 48);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
NVIC_DISABLE_IRQ(IRQ_CMT);
|
||
}
|
||
#define TIMER_INTR_NAME cmt_isr
|
||
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR(f) void f(void)
|
||
|
||
#define CMT_PPS_DIV ((F_BUS + 7999999) / 8000000)
|
||
# if F_BUS < 8000000
|
||
#error IRremote requires at least 8 MHz on Teensy 3.x
|
||
# endif
|
||
|
||
void timerConfigForReceive() {
|
||
SIM_SCGC4 |= SIM_SCGC4_CMT;
|
||
CMT_PPS = CMT_PPS_DIV - 1;
|
||
CMT_CGH1 = 1;
|
||
CMT_CGL1 = 1;
|
||
CMT_CMD1 = 0;
|
||
CMT_CMD2 = 30;
|
||
CMT_CMD3 = 0;
|
||
CMT_CMD4 = (F_BUS / 160000 + CMT_PPS_DIV / 2) / CMT_PPS_DIV - 31;
|
||
CMT_OC = 0;
|
||
CMT_MSC = 0x03;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 5
|
||
|
||
void enableSendPWMByTimer() {
|
||
do {
|
||
CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE;
|
||
} while (0);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
do {
|
||
CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE;
|
||
} while (0);
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt(); // TODO really required here? Do we have a common resource for Teensy3.0, 3.1
|
||
# if defined(IR_SEND_PIN)
|
||
pinMode(IR_SEND_PIN, OUTPUT);
|
||
# else
|
||
pinMode(IrSender.sendPin, OUTPUT);
|
||
# endif
|
||
|
||
SIM_SCGC4 |= SIM_SCGC4_CMT;
|
||
SIM_SOPT2 |= SIM_SOPT2_PTD7PAD;
|
||
CMT_PPS = CMT_PPS_DIV - 1;
|
||
CMT_CGH1 = ((F_BUS / CMT_PPS_DIV / 3000) + ((aFrequencyKHz) / 2)) / (aFrequencyKHz);
|
||
CMT_CGL1 = ((F_BUS / CMT_PPS_DIV / 1500) + ((aFrequencyKHz) / 2)) / (aFrequencyKHz);
|
||
CMT_CMD1 = 0;
|
||
CMT_CMD2 = 30;
|
||
CMT_CMD3 = 0;
|
||
CMT_CMD4 = 0;
|
||
CMT_OC = 0x60;
|
||
CMT_MSC = 0x01;
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/***************************************
|
||
* Teensy-LC board
|
||
***************************************/
|
||
#elif defined(__MKL26Z64__)
|
||
|
||
// defines for TPM1 timer on Teensy-LC
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
FTM1_SC |= FTM_SC_TOF;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
NVIC_ENABLE_IRQ(IRQ_FTM1);
|
||
NVIC_SET_PRIORITY(IRQ_FTM1, 0);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
NVIC_DISABLE_IRQ(IRQ_FTM1);
|
||
}
|
||
#define TIMER_INTR_NAME ftm1_isr
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR(f) void f(void)
|
||
|
||
void timerConfigForReceive() {
|
||
SIM_SCGC6 |= SIM_SCGC6_TPM1;
|
||
FTM1_SC = 0;
|
||
FTM1_CNT = 0;
|
||
FTM1_MOD = (F_PLL / 40000) - 1;
|
||
FTM1_C0V = 0;
|
||
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE;
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 16
|
||
|
||
void enableSendPWMByTimer() {
|
||
FTM1_CNT = 0;
|
||
CORE_PIN16_CONFIG = PORT_PCR_MUX(3) | PORT_PCR_DSE | PORT_PCR_SRE;
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
CORE_PIN16_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_SRE;
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
# if defined(IR_SEND_PIN)
|
||
pinMode(IR_SEND_PIN, OUTPUT);
|
||
# else
|
||
pinMode(IrSender.sendPin, OUTPUT);
|
||
# endif
|
||
|
||
SIM_SCGC6 |= SIM_SCGC6_TPM1;
|
||
FTM1_SC = 0;
|
||
FTM1_CNT = 0;
|
||
FTM1_MOD = ((F_PLL / 2000) / aFrequencyKHz) - 1;
|
||
FTM1_C0V = ((F_PLL / 6000) / aFrequencyKHz) - 1;
|
||
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0);
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/***************************************
|
||
* Teensy 4.0, 4.1, MicroMod boards
|
||
***************************************/
|
||
#elif defined(__IMXRT1062__)
|
||
|
||
// defines for FlexPWM1 timer on Teensy 4
|
||
#define TIMER_REQUIRES_RESET_INTR_PENDING
|
||
void timerResetInterruptPending() {
|
||
FLEXPWM1_SM3STS = FLEXPWM_SMSTS_RF;
|
||
}
|
||
void timerEnableReceiveInterrupt() {
|
||
attachInterruptVector(IRQ_FLEXPWM1_3, pwm1_3_isr);
|
||
FLEXPWM1_SM3STS = FLEXPWM_SMSTS_RF;
|
||
FLEXPWM1_SM3INTEN = FLEXPWM_SMINTEN_RIE;
|
||
NVIC_ENABLE_IRQ (IRQ_FLEXPWM1_3), NVIC_SET_PRIORITY(IRQ_FLEXPWM1_3, 48);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
NVIC_DISABLE_IRQ (IRQ_FLEXPWM1_3);
|
||
}
|
||
#define TIMER_INTR_NAME pwm1_3_isr
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR(f) void (f)(void)
|
||
void pwm1_3_isr();
|
||
|
||
void timerConfigForReceive() {
|
||
uint32_t period = (float) F_BUS_ACTUAL * (float) (MICROS_PER_TICK) * 0.0000005f;
|
||
uint32_t prescale = 0;
|
||
while (period > 32767) {
|
||
period = period >> 1;
|
||
if (prescale < 7)
|
||
prescale++;
|
||
}
|
||
FLEXPWM1_FCTRL0 |= FLEXPWM_FCTRL0_FLVL(8);
|
||
FLEXPWM1_FSTS0 = 0x0008;
|
||
FLEXPWM1_MCTRL |= FLEXPWM_MCTRL_CLDOK(8);
|
||
FLEXPWM1_SM3CTRL2 = FLEXPWM_SMCTRL2_INDEP;
|
||
FLEXPWM1_SM3CTRL = FLEXPWM_SMCTRL_HALF | FLEXPWM_SMCTRL_PRSC(prescale);
|
||
FLEXPWM1_SM3INIT = -period;
|
||
FLEXPWM1_SM3VAL0 = 0;
|
||
FLEXPWM1_SM3VAL1 = period;
|
||
FLEXPWM1_SM3VAL2 = 0;
|
||
FLEXPWM1_SM3VAL3 = 0;
|
||
FLEXPWM1_SM3VAL4 = 0;
|
||
FLEXPWM1_SM3VAL5 = 0;
|
||
FLEXPWM1_MCTRL |= FLEXPWM_MCTRL_LDOK(8) | FLEXPWM_MCTRL_RUN(8);
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#define IR_SEND_PIN 7
|
||
void enableSendPWMByTimer() {
|
||
FLEXPWM1_OUTEN |= FLEXPWM_OUTEN_PWMA_EN(8);
|
||
IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00 = 6;
|
||
}
|
||
|
||
void disableSendPWMByTimer() {
|
||
IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00 = 5;
|
||
FLEXPWM1_OUTEN &= ~FLEXPWM_OUTEN_PWMA_EN(8);
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
# if defined(IR_SEND_PIN)
|
||
pinMode(IR_SEND_PIN, OUTPUT);
|
||
# else
|
||
pinMode(IrSender.sendPin, OUTPUT);
|
||
# endif
|
||
|
||
uint32_t period = (float) F_BUS_ACTUAL / (float) ((aFrequencyKHz) * 2000);
|
||
uint32_t prescale = 0;
|
||
while (period > 32767) {
|
||
period = period >> 1;
|
||
if (prescale < 7)
|
||
prescale++;
|
||
}
|
||
FLEXPWM1_FCTRL0 |= FLEXPWM_FCTRL0_FLVL(8);
|
||
FLEXPWM1_FSTS0 = 0x0008;
|
||
FLEXPWM1_MCTRL |= FLEXPWM_MCTRL_CLDOK(8);
|
||
FLEXPWM1_SM3CTRL2 = FLEXPWM_SMCTRL2_INDEP;
|
||
FLEXPWM1_SM3CTRL = FLEXPWM_SMCTRL_HALF | FLEXPWM_SMCTRL_PRSC(prescale);
|
||
FLEXPWM1_SM3INIT = -period;
|
||
FLEXPWM1_SM3VAL0 = 0;
|
||
FLEXPWM1_SM3VAL1 = period;
|
||
FLEXPWM1_SM3VAL2 = -(period / 3);
|
||
FLEXPWM1_SM3VAL3 = period / 3;
|
||
FLEXPWM1_SM3VAL4 = 0;
|
||
FLEXPWM1_SM3VAL5 = 0;
|
||
FLEXPWM1_MCTRL |= FLEXPWM_MCTRL_LDOK(8) | FLEXPWM_MCTRL_RUN(8);
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
#elif defined(ESP8266)
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error "No support for hardware PWM generation for ESP8266"
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() IRAM_ATTR void IRTimerInterruptHandler()
|
||
IRAM_ATTR void IRTimerInterruptHandler();
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
timer1_attachInterrupt(&IRTimerInterruptHandler); // enables interrupt too
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
timer1_detachInterrupt(); // disables interrupt too }
|
||
}
|
||
|
||
void timerConfigForReceive() {
|
||
timer1_isr_init();
|
||
/*
|
||
* TIM_DIV1 = 0, //80MHz (80 ticks/us - 104857.588 us max)
|
||
* TIM_DIV16 = 1, //5MHz (5 ticks/us - 1677721.4 us max)
|
||
* TIM_DIV256 = 3 //312.5Khz (1 tick = 3.2us - 26843542.4 us max)
|
||
*/
|
||
timer1_enable(TIM_DIV16, TIM_EDGE, TIM_LOOP);
|
||
timer1_write((80 / 16) * MICROS_PER_TICK); // 80 for 80 and 160! MHz clock, 16 for TIM_DIV16 above
|
||
}
|
||
|
||
/**********************************************************
|
||
* ESP32 boards - can use any pin for send PWM
|
||
* Receive timer and send generation are independent,
|
||
* so it is recommended to always define SEND_PWM_BY_TIMER
|
||
**********************************************************/
|
||
#elif defined(ESP32)
|
||
// Variables specific to the ESP32.
|
||
// the ledc functions behave like hardware timers for us :-), so we do not require our own soft PWM generation code.
|
||
hw_timer_t *s50usTimer; // set by timerConfigForReceive()
|
||
|
||
|
||
# if !defined(SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL)
|
||
#define SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL 0 // The channel used for PWM 0 to 7 are high speed PWM channels
|
||
# endif
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
timerAlarmEnable (s50usTimer);
|
||
}
|
||
#if ESP_ARDUINO_VERSION < ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
||
void timerDisableReceiveInterrupt() {
|
||
if (s50usTimer != NULL) {
|
||
timerEnd(s50usTimer);
|
||
timerDetachInterrupt(s50usTimer);
|
||
}
|
||
}
|
||
#else
|
||
void timerDisableReceiveInterrupt() {
|
||
if (s50usTimer != NULL) {
|
||
timerAlarmDisable (s50usTimer);
|
||
}
|
||
}
|
||
#endif
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() IRAM_ATTR void IRTimerInterruptHandler()
|
||
IRAM_ATTR void IRTimerInterruptHandler();
|
||
|
||
void timerConfigForReceive() {
|
||
// ESP32 has a proper API to setup timers, no weird chip macros needed
|
||
// simply call the readable API versions :)
|
||
// 3 timers, choose #1, 80 divider for microsecond precision @80MHz clock, count_up = true
|
||
s50usTimer = timerBegin(1, 80, true);
|
||
timerAttachInterrupt(s50usTimer, &IRTimerInterruptHandler, false); // false -> level interrupt, true -> edge interrupt, but this is not supported :-(
|
||
// every 50 us, autoreload = true
|
||
timerAlarmWrite(s50usTimer, MICROS_PER_TICK, true);
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
void enableSendPWMByTimer() {
|
||
ledcWrite(SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL, (IR_SEND_DUTY_CYCLE_PERCENT * 256) / 100); // * 256 since we have 8 bit resolution
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
ledcWrite(SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL, 0);
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* ledcWrite since ESP 2.0.2 does not work if pin mode is set. Disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
ledcSetup(SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL, aFrequencyKHz * 1000, 8); // 8 bit PWM resolution
|
||
# if defined(IR_SEND_PIN)
|
||
ledcAttachPin(IR_SEND_PIN, SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL); // bind pin to channel
|
||
# else
|
||
ledcAttachPin(IrSender.sendPin, SEND_AND_RECEIVE_TIMER_LEDC_CHANNEL); // bind pin to channel
|
||
# endif
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/***************************************
|
||
* SAMD boards like DUE and Zero
|
||
***************************************/
|
||
#elif defined(ARDUINO_ARCH_SAMD)
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error PWM generation by hardware is not yet implemented for SAMD
|
||
# endif
|
||
|
||
# if !defined(IR_SAMD_TIMER)
|
||
# if defined(__SAMD51__)
|
||
#define IR_SAMD_TIMER TC5
|
||
#define IR_SAMD_TIMER_IRQ TC5_IRQn
|
||
# else
|
||
// SAMD21
|
||
#define IR_SAMD_TIMER TC3
|
||
#define IR_SAMD_TIMER_ID GCLK_CLKCTRL_ID_TCC2_TC3
|
||
#define IR_SAMD_TIMER_IRQ TC3_IRQn
|
||
# endif
|
||
# endif
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
NVIC_EnableIRQ (IR_SAMD_TIMER_IRQ);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
NVIC_DisableIRQ (IR_SAMD_TIMER_IRQ); // or TC5->INTENCLR.bit.MC0 = 1; or TC5->COUNT16.CTRLA.reg &= ~TC_CTRLA_ENABLE;
|
||
|
||
}
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
// The ISR is now TC3_Handler() or TC5_Handler() below
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR(f) void IRTimerInterruptHandler(void)
|
||
// ATSAMD Timer IRQ functions
|
||
void IRTimerInterruptHandler();
|
||
|
||
/**
|
||
* Adafruit M4 code (cores/arduino/startup.c) configures these clock generators:
|
||
* GCLK0 = F_CPU
|
||
* GCLK2 = 100 MHz
|
||
* GCLK1 = 48 MHz // This Clock is present in SAMD21 and SAMD51
|
||
* GCLK4 = 12 MHz
|
||
* GCLK3 = XOSC32K
|
||
*/
|
||
void timerConfigForReceive() {
|
||
TcCount16 *TC = (TcCount16*) IR_SAMD_TIMER;
|
||
|
||
# if defined(__SAMD51__)
|
||
// Enable the TC5 clock, use generic clock generator 0 (F_CPU) for TC5
|
||
GCLK->PCHCTRL[TC5_GCLK_ID].reg = GCLK_PCHCTRL_GEN_GCLK0_Val | (1 << GCLK_PCHCTRL_CHEN_Pos);
|
||
|
||
// The TC should be disabled before the TC is reset in order to avoid undefined behavior.
|
||
TC->CTRLA.reg &= ~TC_CTRLA_ENABLE; // Disable the Timer
|
||
while (TC->SYNCBUSY.bit.ENABLE)
|
||
; // Wait for disabled
|
||
// Reset TCx
|
||
TC->CTRLA.reg = TC_CTRLA_SWRST;
|
||
// When writing a '1' to the CTRLA.SWRST bit it will immediately read as '1'.
|
||
while (TC->SYNCBUSY.bit.SWRST)
|
||
; // CTRL.SWRST will be cleared by hardware when the peripheral has been reset.
|
||
|
||
// SAMD51 has F_CPU = 120 MHz
|
||
TC->CC[0].reg = ((MICROS_PER_TICK * (F_CPU / MICROS_IN_ONE_SECOND)) / 16) - 1; // (375 - 1);
|
||
|
||
/*
|
||
* Set timer counter mode to 16 bits, set mode as match frequency, prescaler is DIV16 => 7.5 MHz clock, start counter
|
||
*/
|
||
TC->CTRLA.reg |= TC_CTRLA_MODE_COUNT16 | TC_WAVE_WAVEGEN_MFRQ | TC_CTRLA_PRESCALER_DIV16 | TC_CTRLA_ENABLE;
|
||
// while (TC5->COUNT16.STATUS.bit.SYNCBUSY == 1); // The next commands do an implicit wait :-)
|
||
# else
|
||
// Enable GCLK and select GCLK0 (F_CPU) as clock for TC4 and TC5
|
||
REG_GCLK_CLKCTRL = (uint16_t)(GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | IR_SAMD_TIMER_ID);
|
||
while (GCLK->STATUS.bit.SYNCBUSY == 1)
|
||
;
|
||
|
||
// The TC should be disabled before the TC is reset in order to avoid undefined behavior.
|
||
TC->CTRLA.reg &= ~TC_CTRLA_ENABLE;
|
||
// When write-synchronization is ongoing for a register, any subsequent write attempts to this register will be discarded, and an error will be reported.
|
||
while (TC->STATUS.bit.SYNCBUSY == 1)
|
||
; // wait for sync to ensure that we can write again to COUNT16.CTRLA.reg
|
||
// Reset TCx
|
||
TC->CTRLA.reg = TC_CTRLA_SWRST;
|
||
// When writing a <20>1<EFBFBD> to the CTRLA.SWRST bit it will immediately read as <20>1<EFBFBD>.
|
||
while (TC->CTRLA.bit.SWRST)
|
||
; // CTRL.SWRST will be cleared by hardware when the peripheral has been reset.
|
||
|
||
// SAMD51 has F_CPU = 48 MHz
|
||
TC->CC[0].reg = ((MICROS_PER_TICK * (F_CPU / MICROS_IN_ONE_SECOND)) / 16) - 1; // (150 - 1);
|
||
|
||
/*
|
||
* Set timer counter mode to 16 bits, set mode as match frequency, prescaler is DIV16 => 3 MHz clock, start counter
|
||
*/
|
||
TC->CTRLA.reg |= TC_CTRLA_MODE_COUNT16 | TC_CTRLA_WAVEGEN_MFRQ | TC_CTRLA_PRESCALER_DIV16 | TC_CTRLA_ENABLE;
|
||
|
||
# endif
|
||
// Configure interrupt request
|
||
NVIC_DisableIRQ (IR_SAMD_TIMER_IRQ);
|
||
NVIC_ClearPendingIRQ(IR_SAMD_TIMER_IRQ);
|
||
NVIC_SetPriority(IR_SAMD_TIMER_IRQ, 0);
|
||
NVIC_EnableIRQ(IR_SAMD_TIMER_IRQ);
|
||
|
||
// Enable the compare interrupt
|
||
TC->INTENSET.bit.MC0 = 1;
|
||
}
|
||
|
||
# if !defined(DISABLE_CODE_FOR_RECEIVER)
|
||
# if defined(__SAMD51__)
|
||
void TC5_Handler(void) {
|
||
TcCount16 *TC = (TcCount16*) IR_SAMD_TIMER;
|
||
// Check for right interrupt bit
|
||
if (TC->INTFLAG.bit.MC0 == 1) {
|
||
// reset bit for next turn
|
||
TC->INTFLAG.bit.MC0 = 1;
|
||
IRTimerInterruptHandler();
|
||
}
|
||
}
|
||
# else
|
||
void TC3_Handler(void) {
|
||
TcCount16 *TC = (TcCount16*) IR_SAMD_TIMER;
|
||
// Check for right interrupt bit
|
||
if (TC->INTFLAG.bit.MC0 == 1) {
|
||
// reset bit for next turn
|
||
TC->INTFLAG.bit.MC0 = 1;
|
||
IRTimerInterruptHandler();
|
||
}
|
||
}
|
||
# endif // defined(__SAMD51__)
|
||
# endif // !defined(DISABLE_CODE_FOR_RECEIVER)
|
||
|
||
/***************************************
|
||
* Mbed based boards
|
||
***************************************/
|
||
#elif defined(ARDUINO_ARCH_MBED) // Arduino Nano 33 BLE + Sparkfun Apollo3 + Nano RP2040 Connect
|
||
#include "mbed.h"
|
||
mbed::Ticker s50usTimer;
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void IRTimerInterruptHandler(void)
|
||
void IRTimerInterruptHandler();
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
s50usTimer.attach(IRTimerInterruptHandler, std::chrono::microseconds(MICROS_PER_TICK));
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
s50usTimer.detach();
|
||
}
|
||
|
||
void timerConfigForReceive() {
|
||
s50usTimer.attach(IRTimerInterruptHandler, std::chrono::microseconds(MICROS_PER_TICK));
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#include "pins_arduino.h" // for digitalPinToPinName()
|
||
|
||
# if defined(IR_SEND_PIN)
|
||
mbed::PwmOut sPwmOutForSendPWM(digitalPinToPinName(IR_SEND_PIN));
|
||
# else
|
||
mbed::PwmOut sPwmOutForSendPWM(digitalPinToPinName(IrSender.sendPin));
|
||
# endif
|
||
uint8_t sIROutPuseWidth;
|
||
|
||
void enableSendPWMByTimer() {
|
||
sPwmOutForSendPWM.pulsewidth_us(sIROutPuseWidth);
|
||
}
|
||
//void enableSendPWMByTimer() { sPwmOutForSendPWM.resume(); sPwmOutForSendPWM.pulsewidth_us(sIROutPuseWidth);}
|
||
//void disableSendPWMByTimer() { sPwmOutForSendPWM.suspend();} // this kills pulsewidth_us value and does not set output level to LOW
|
||
|
||
void disableSendPWMByTimer() {
|
||
sPwmOutForSendPWM.pulsewidth_us(0); // this also sets output level to LOW :-)
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
sPwmOutForSendPWM.period_us(1000 / aFrequencyKHz); // 26.315 for 38 kHz
|
||
sIROutPuseWidth = (1000 * IR_SEND_DUTY_CYCLE_PERCENT) / (aFrequencyKHz * 100);
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/*************************************************************************************************************************************
|
||
* RP2040 based boards for pico core
|
||
* https://github.com/earlephilhower/arduino-pico
|
||
* https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
|
||
* Can use any pin for PWM, no timer restrictions
|
||
*************************************************************************************************************************************/
|
||
#elif defined(ARDUINO_ARCH_RP2040) // Raspberry Pi Pico, Adafruit Feather RP2040, etc.
|
||
#include "pico/time.h"
|
||
|
||
repeating_timer_t s50usTimer;
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void IRTimerInterruptHandler(void)
|
||
void IRTimerInterruptHandler();
|
||
// The timer callback has a parameter and a return value
|
||
bool IRTimerInterruptHandlerHelper(repeating_timer_t*) {
|
||
IRTimerInterruptHandler();
|
||
return true;
|
||
}
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
add_repeating_timer_us(-(MICROS_PER_TICK), IRTimerInterruptHandlerHelper, NULL, &s50usTimer);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
cancel_repeating_timer(&s50usTimer);
|
||
}
|
||
|
||
void timerConfigForReceive() {
|
||
// no need for initializing timer at setup()
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#include "hardware/pwm.h"
|
||
|
||
uint sSliceNumberForSendPWM;
|
||
uint sChannelNumberForSendPWM;
|
||
uint sIROutPuseWidth;
|
||
|
||
/*
|
||
* If we just disable the PWM, the counter stops and the output stays at the state is currently has
|
||
*/
|
||
void enableSendPWMByTimer() {
|
||
pwm_set_counter(sSliceNumberForSendPWM, 0);
|
||
pwm_set_chan_level(sSliceNumberForSendPWM, sChannelNumberForSendPWM, sIROutPuseWidth);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
pwm_set_chan_level(sSliceNumberForSendPWM, sChannelNumberForSendPWM, 0); // this sets output also to LOW
|
||
}
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
# if defined(IR_SEND_PIN)
|
||
gpio_set_function(IR_SEND_PIN, GPIO_FUNC_PWM);
|
||
// Find out which PWM slice is connected to IR_SEND_PIN
|
||
sSliceNumberForSendPWM = pwm_gpio_to_slice_num(IR_SEND_PIN);
|
||
sChannelNumberForSendPWM = pwm_gpio_to_channel(IR_SEND_PIN);
|
||
# else
|
||
gpio_set_function(IrSender.sendPin, GPIO_FUNC_PWM);
|
||
// Find out which PWM slice is connected to IR_SEND_PIN
|
||
sSliceNumberForSendPWM = pwm_gpio_to_slice_num(IrSender.sendPin);
|
||
sChannelNumberForSendPWM = pwm_gpio_to_channel(IrSender.sendPin);
|
||
# endif
|
||
uint16_t tPWMWrapValue = (clock_get_hz(clk_sys)) / (aFrequencyKHz * 1000); // 3289.473 for 38 kHz @125 MHz clock. We have a 16 bit counter and use system clock (125 MHz)
|
||
|
||
pwm_config tPWMConfig = pwm_get_default_config();
|
||
pwm_config_set_wrap(&tPWMConfig, tPWMWrapValue - 1);
|
||
pwm_init(sSliceNumberForSendPWM, &tPWMConfig, false); // we do not want to send now
|
||
sIROutPuseWidth = ((tPWMWrapValue * IR_SEND_DUTY_CYCLE_PERCENT) / 100) - 1; // 985.84 for 38 kHz
|
||
pwm_set_chan_level(sSliceNumberForSendPWM, sChannelNumberForSendPWM, 0);
|
||
pwm_set_enabled(sSliceNumberForSendPWM, true);
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/***************************************
|
||
* NRF5 boards like the BBC:Micro
|
||
***************************************/
|
||
#elif defined(NRF5) || defined(ARDUINO_ARCH_NRF52840)
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error PWM generation by hardware not implemented for NRF5
|
||
# endif
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
NVIC_EnableIRQ (TIMER2_IRQn);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
NVIC_DisableIRQ (TIMER2_IRQn);
|
||
}
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR(f) void IRTimerInterruptHandler(void)
|
||
void IRTimerInterruptHandler();
|
||
|
||
void timerConfigForReceive() {
|
||
NRF_TIMER2->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Timer Mode
|
||
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
|
||
NRF_TIMER2->PRESCALER = 4; // f TIMER = 16 MHz / (2 ^ PRESCALER ) : 4 -> 1 MHz, 1 uS
|
||
NRF_TIMER2->BITMODE = TIMER_BITMODE_BITMODE_16Bit; //Set counter to 16 bit resolution
|
||
NRF_TIMER2->CC[0] = MICROS_PER_TICK; //Set value for TIMER2 compare register 0, to trigger every 50 uS
|
||
NRF_TIMER2->CC[1] = 0; //Set value for TIMER2 compare register 1
|
||
|
||
// Enable interrupt on Timer 2, for CC[0] compare match events
|
||
NRF_TIMER2->INTENSET = (TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos);
|
||
NRF_TIMER2->TASKS_START = 1; // Start TIMER2
|
||
|
||
// timerAttachInterrupt(timer, &IRTimerInterruptHandler, 1);
|
||
}
|
||
|
||
#if !defined(DISABLE_CODE_FOR_RECEIVER)
|
||
/** TIMTER2 peripheral interrupt handler. This interrupt handler is called whenever there it a TIMER2 interrupt
|
||
* Don't mess with this line. really.
|
||
*/
|
||
extern "C" {
|
||
void TIMER2_IRQHandler(void) {
|
||
// Interrupt Service Routine - Fires every 50uS
|
||
if ((NRF_TIMER2->EVENTS_COMPARE[0] != 0) && ((NRF_TIMER2->INTENSET & TIMER_INTENSET_COMPARE0_Msk) != 0)) {
|
||
NRF_TIMER2->EVENTS_COMPARE[0] = 0; //Clear compare register 0 event
|
||
IRTimerInterruptHandler(); // call the IR-receive function
|
||
NRF_TIMER2->CC[0] += 50;
|
||
}
|
||
}
|
||
}
|
||
#endif
|
||
|
||
/**********************************************************************************************************************
|
||
* BluePill in 2 flavors see https://samuelpinches.com.au/3d-printer/cutting-through-some-confusion-on-stm32-and-arduino/
|
||
*
|
||
* Recommended original Arduino_STM32 by Roger Clark.
|
||
* http://dan.drown.org/stm32duino/package_STM32duino_index.json
|
||
* STM32F1 architecture for "Generic STM32F103C series" from "STM32F1 Boards (Arduino_STM32)" of Arduino Board manager
|
||
**********************************************************************************************************************/
|
||
#elif defined(__STM32F1__) || defined(ARDUINO_ARCH_STM32F1)
|
||
#include <HardwareTimer.h> // 4 timers and 4. timer (4.channel) is used for tone()
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error PWM generation by hardware not implemented for STM32
|
||
# endif
|
||
|
||
/*
|
||
* Use timer 3 as IR timer.
|
||
* Timer 3 blocks PA6, PA7, PB0, PB1, so if you require one of them as tone() or Servo output, you must choose another timer.
|
||
*/
|
||
HardwareTimer s50usTimer(3);
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
s50usTimer.resume();
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
s50usTimer.pause();
|
||
}
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void IRTimerInterruptHandler(void)
|
||
void IRTimerInterruptHandler();
|
||
|
||
void timerConfigForReceive() {
|
||
s50usTimer.setMode(TIMER_CH1, TIMER_OUTPUT_COMPARE);
|
||
s50usTimer.setPrescaleFactor(1);
|
||
s50usTimer.setOverflow((F_CPU / MICROS_IN_ONE_SECOND) * MICROS_PER_TICK);
|
||
s50usTimer.attachInterrupt(TIMER_CH1, IRTimerInterruptHandler);
|
||
s50usTimer.refresh();
|
||
}
|
||
|
||
/**********************************************************************************************************************
|
||
* STM32duino by ST Microsystems.
|
||
* https://github.com/stm32duino/Arduino_Core_STM32
|
||
* https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json
|
||
* stm32 architecture for "Generic STM32F1 series" from "STM32 Boards (selected from submenu)" of Arduino Board manager
|
||
**********************************************************************************************************************/
|
||
#elif defined(STM32F1xx) || defined(ARDUINO_ARCH_STM32)
|
||
#include <HardwareTimer.h> // 4 timers and 3. timer is used for tone(), 2. for Servo
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
#error PWM generation by hardware not implemented for STM32
|
||
# endif
|
||
|
||
/*
|
||
* Use timer 4 as IR timer.
|
||
* Timer 4 blocks PB6, PB7, PB8, PB9, so if you need one them as tone() or Servo output, you must choose another timer.
|
||
*/
|
||
# if defined(TIM4)
|
||
HardwareTimer s50usTimer(TIM4);
|
||
# else
|
||
HardwareTimer s50usTimer(TIM2);
|
||
# endif
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
s50usTimer.resume();
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
s50usTimer.pause();
|
||
}
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void IRTimerInterruptHandler(void)
|
||
void IRTimerInterruptHandler();
|
||
|
||
void timerConfigForReceive() {
|
||
s50usTimer.setOverflow(MICROS_PER_TICK, MICROSEC_FORMAT); // 50 uS
|
||
s50usTimer.attachInterrupt(IRTimerInterruptHandler);
|
||
s50usTimer.resume();
|
||
}
|
||
|
||
/***************************************
|
||
* Particle special IntervalTimer
|
||
* !!!UNTESTED!!!
|
||
***************************************/
|
||
#elif defined(PARTICLE)
|
||
# ifndef __INTERVALTIMER_H__
|
||
#include "SparkIntervalTimer.h" // SparkIntervalTimer.h is required if PARTICLE is defined.
|
||
# endif
|
||
|
||
extern IntervalTimer timer;
|
||
extern int ir_out_kHz;
|
||
|
||
void timerEnableReceiveInterrupt() {
|
||
timer.begin(IRTimerInterruptHandler, MICROS_PER_TICK, uSec);
|
||
}
|
||
void timerDisableReceiveInterrupt() {
|
||
timer.end();
|
||
}
|
||
|
||
// Redefinition of ISR macro which creates a plain function now
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void IRTimerInterruptHandler(void)
|
||
|
||
void timerConfigForReceive() {
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
# if defined(IR_SEND_PIN)
|
||
void enableSendPWMByTimer() {
|
||
analogWrite(IR_SEND_PIN, ((256L * 100) / IR_SEND_DUTY_CYCLE_PERCENT)), ir_out_kHz*1000);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
analogWrite(IR_SEND_PIN, 0, ir_out_kHz*1000);
|
||
}
|
||
# else
|
||
void enableSendPWMByTimer() {
|
||
analogWrite(IrSender.sendPin, ((256L * 100) / IR_SEND_DUTY_CYCLE_PERCENT), ir_out_kHz * 1000);
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
analogWrite(IrSender.sendPin, 0, ir_out_kHz * 1000);
|
||
}
|
||
# endif
|
||
|
||
|
||
/*
|
||
* timerConfigForSend() is used exclusively by IRsend::enableIROut()
|
||
* Set output pin mode and disable receive interrupt if it uses the same resource
|
||
*/
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
# if defined(IR_SEND_PIN)
|
||
pinMode(IR_SEND_PIN, OUTPUT);
|
||
# else
|
||
pinMode(IrSender.sendPin, OUTPUT);
|
||
# endif
|
||
ir_out_kHz = aFrequencyKHz;
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
/***************************************
|
||
* Unknown CPU board
|
||
***************************************/
|
||
#else
|
||
#error Internal code configuration error, no timer functions implemented for this CPU / board
|
||
/*
|
||
* Dummy definitions to avoid more irritating compile errors
|
||
*/
|
||
|
||
void timerEnableReceiveInterrupt() {};
|
||
void timerDisableReceiveInterrupt() {};
|
||
|
||
# if defined(ISR)
|
||
#undef ISR
|
||
# endif
|
||
#define ISR() void notImplemented(void)
|
||
|
||
void timerConfigForReceive() {
|
||
}
|
||
|
||
# if defined(SEND_PWM_BY_TIMER)
|
||
void enableSendPWMByTimer() {
|
||
}
|
||
void disableSendPWMByTimer() {
|
||
}
|
||
|
||
void timerConfigForSend(uint8_t aFrequencyKHz) {
|
||
timerDisableReceiveInterrupt();
|
||
# if defined(IR_SEND_PIN)
|
||
pinMode(IR_SEND_PIN, OUTPUT);
|
||
# else
|
||
pinMode(IrSender.sendPin, OUTPUT);
|
||
# endif
|
||
(void) aFrequencyKHz;
|
||
}
|
||
# endif // defined(SEND_PWM_BY_TIMER)
|
||
|
||
#endif // defined(DOXYGEN / CPU_TYPES)
|
||
|
||
/** @}*/
|
||
/** @}*/
|
||
#endif // _IR_TIMER_HPP
|