348 lines
15 KiB
C
348 lines
15 KiB
C
/*
|
|
* PinDefinitionsAndMore.h
|
|
*
|
|
* Contains pin definitions for IRremote examples for various platforms
|
|
* as well as definitions for feedback LED and tone() and includes
|
|
*
|
|
* Copyright (C) 2021-2023 Armin Joachimsmeyer
|
|
* armin.joachimsmeyer@gmail.com
|
|
*
|
|
* This file is part of IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
|
*
|
|
* Arduino-IRremote is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Pin mapping table for different platforms
|
|
*
|
|
* Platform IR input IR output Tone Core/Pin schema
|
|
* --------------------------------------------------------------
|
|
* DEFAULT/AVR 2 3 4 Arduino
|
|
* ATtinyX5 0|PB0 4|PB4 3|PB3 ATTinyCore
|
|
* ATtiny167 3|PA3 2|PA2 7|PA7 ATTinyCore
|
|
* ATtiny167 9|PA3 8|PA2 5|PA7 Digispark original core
|
|
* ATtiny84 |PB2 |PA4 |PA3 ATTinyCore
|
|
* ATtiny88 3|PD3 4|PD4 9|PB1 ATTinyCore
|
|
* ATtiny3217 18|PA1 19|PA2 20|PA3 MegaTinyCore
|
|
* ATtiny1604 2 3|PA5 %
|
|
* ATtiny816 14|PA1 16|PA3 1|PA5 MegaTinyCore
|
|
* ATtiny1614 8|PA1 10|PA3 1|PA5 MegaTinyCore
|
|
* SAMD21 3 4 5
|
|
* ESP8266 14|D5 12|D6 %
|
|
* ESP32 15 4 27
|
|
* ESP32-C3 6 7
|
|
* BluePill PA6 PA7 PA3
|
|
* APOLLO3 11 12 5
|
|
* RP2040 3|GPIO15 4|GPIO16 5|GPIO17
|
|
*/
|
|
//#define _IR_MEASURE_TIMING // For debugging purposes.
|
|
|
|
#if defined(__AVR__)
|
|
#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) // Digispark board. For use with ATTinyCore.
|
|
#include "ATtinySerialOut.hpp" // TX is at pin 2 - Available as Arduino library "ATtinySerialOut". Saves 700 bytes program memory and 70 bytes RAM for ATtinyCore.
|
|
#define IR_RECEIVE_PIN PIN_PB0
|
|
#define IR_SEND_PIN PIN_PB4 // Pin 2 is serial output with ATtinySerialOut. Pin 1 is internal LED and Pin3 is USB+ with pullup on Digispark board.
|
|
#define TONE_PIN PIN_PB3
|
|
#define _IR_TIMING_TEST_PIN PIN_PB3
|
|
|
|
# elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__) // Digispark pro board
|
|
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut"
|
|
// For ATtiny167 Pins PB6 and PA3 are usable as interrupt source.
|
|
# if defined(ARDUINO_AVR_DIGISPARKPRO)
|
|
// For use with Digispark original core
|
|
#define IR_RECEIVE_PIN 9 // PA3 - on Digispark board labeled as pin 9
|
|
//#define IR_RECEIVE_PIN 14 // PB6 / INT0 is connected to USB+ on DigisparkPro boards
|
|
#define IR_SEND_PIN 8 // PA2 - on Digispark board labeled as pin 8
|
|
#define TONE_PIN 5 // PA7 - on Digispark board labeled as pin 5
|
|
#define _IR_TIMING_TEST_PIN 10 // PA4
|
|
# else
|
|
// For use with ATTinyCore
|
|
#define IR_RECEIVE_PIN PIN_PA3 // On Digispark board labeled as pin 9 - INT0 is connected to USB+ on DigisparkPro boards
|
|
#define IR_SEND_PIN PIN_PA2 // On Digispark board labeled as pin 8
|
|
#define TONE_PIN PIN_PA7 // On Digispark board labeled as pin 5
|
|
# endif
|
|
|
|
# elif defined(__AVR_ATtiny84__) // For use with ATTinyCore
|
|
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
|
#define IR_RECEIVE_PIN PIN_PB2 // INT0
|
|
#define IR_SEND_PIN PIN_PA4
|
|
#define TONE_PIN PIN_PA3
|
|
#define _IR_TIMING_TEST_PIN PIN_PA5
|
|
|
|
# elif defined(__AVR_ATtiny88__) // MH-ET Tiny88 board. For use with ATTinyCore.
|
|
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
|
// Pin 6 is TX, pin 7 is RX
|
|
#define IR_RECEIVE_PIN PIN_PD3 // 3 - INT1
|
|
#define IR_SEND_PIN PIN_PD4 // 4
|
|
#define TONE_PIN PIN_PB1 // 9
|
|
#define _IR_TIMING_TEST_PIN PIN_PB0 // 8
|
|
|
|
# elif defined(__AVR_ATtiny1616__) || defined(__AVR_ATtiny3216__) || defined(__AVR_ATtiny3217__) // For use with megaTinyCore
|
|
// Tiny Core Dev board
|
|
// https://www.tindie.com/products/xkimi/tiny-core-16-dev-board-attiny1616/ - Out of Stock
|
|
// https://www.tindie.com/products/xkimi/tiny-core-32-dev-board-attiny3217/ - Out of Stock
|
|
#define IR_RECEIVE_PIN PIN_PA1 // use 18 instead of PIN_PA1 for TinyCore32
|
|
#define IR_SEND_PIN PIN_PA2 // 19
|
|
#define TONE_PIN PIN_PA3 // 20
|
|
#define APPLICATION_PIN PIN_PA0 // 0
|
|
#undef LED_BUILTIN // No LED available on the TinyCore 32 board, take the one on the programming board which is connected to the DAC output
|
|
#define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32
|
|
|
|
# elif defined(__AVR_ATtiny816__) // For use with megaTinyCore
|
|
#define IR_RECEIVE_PIN PIN_PA1 // 14
|
|
#define IR_SEND_PIN PIN_PA1 // 16
|
|
#define TONE_PIN PIN_PA5 // 1
|
|
#define APPLICATION_PIN PIN_PA4 // 0
|
|
#undef LED_BUILTIN // No LED available, take the one which is connected to the DAC output
|
|
#define LED_BUILTIN PIN_PB5 // 4
|
|
|
|
# elif defined(__AVR_ATtiny1614__) // For use with megaTinyCore
|
|
#define IR_RECEIVE_PIN PIN_PA1 // 8
|
|
#define IR_SEND_PIN PIN_PA3 // 10
|
|
#define TONE_PIN PIN_PA5 // 1
|
|
#define APPLICATION_PIN PIN_PA4 // 0
|
|
|
|
# elif defined(__AVR_ATtiny1604__) // For use with megaTinyCore
|
|
#define IR_RECEIVE_PIN PIN_PA6 // 2 - To be compatible with interrupt example, pin 2 is chosen here.
|
|
#define IR_SEND_PIN PIN_PA7 // 3
|
|
#define APPLICATION_PIN PIN_PB2 // 5
|
|
|
|
#define tone(...) void() // Define as void, since TCB0_INT_vect is also used by tone()
|
|
#define noTone(a) void()
|
|
#define TONE_PIN 42 // Dummy for examples using it
|
|
|
|
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
|
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
|
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
|
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
|
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|
|
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
|
|
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) \
|
|
|| defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) \
|
|
|| defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 13
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
# else // Default as for ATmega328 like on Uno, Nano, Leonardo, Teensy 2.0 etc.
|
|
#define IR_RECEIVE_PIN 2 // To be compatible with interrupt example, pin 2 is chosen here.
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
# if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro is __AVR_ATmega32U4__ but has different external circuit
|
|
// We have no built in LED at pin 13 -> reuse RX LED
|
|
#undef LED_BUILTIN
|
|
#define LED_BUILTIN LED_BUILTIN_RX
|
|
# endif
|
|
# endif // defined(__AVR_ATtiny25__)...
|
|
|
|
#elif defined(ARDUINO_ARCH_RENESAS_UNO) // Uno R4
|
|
// To be compatible with Uno R3.
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
#elif defined(ESP8266)
|
|
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D4) is active LOW
|
|
#define IR_RECEIVE_PIN 14 // D5
|
|
#define IR_SEND_PIN 12 // D6 - D4/pin 2 is internal LED
|
|
#define _IR_TIMING_TEST_PIN 2 // D4
|
|
#define APPLICATION_PIN 13 // D7
|
|
|
|
#define tone(...) void() // tone() inhibits receive timer
|
|
#define noTone(a) void()
|
|
#define TONE_PIN 42 // Dummy for examples using it
|
|
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32C3) || defined(ARDUINO_ESP32C3_DEV)
|
|
#define NO_LED_FEEDBACK_CODE // The WS2812 on pin 8 of AI-C3 board crashes if used as receive feedback LED, other I/O pins are working...
|
|
#define IR_RECEIVE_PIN 6
|
|
#define IR_SEND_PIN 7
|
|
#define TONE_PIN 10
|
|
#define APPLICATION_PIN 18
|
|
|
|
#elif defined(ESP32)
|
|
#include <Arduino.h>
|
|
|
|
// tone() is included in ESP32 core since 2.0.2
|
|
#if !defined(ESP_ARDUINO_VERSION_VAL)
|
|
#define ESP_ARDUINO_VERSION_VAL(major, minor, patch) 12345678
|
|
#endif
|
|
#if ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
|
#define TONE_LEDC_CHANNEL 1 // Using channel 1 makes tone() independent of receiving timer -> No need to stop receiving timer.
|
|
void tone(uint8_t aPinNumber, unsigned int aFrequency){
|
|
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
|
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
|
}
|
|
void tone(uint8_t aPinNumber, unsigned int aFrequency, unsigned long aDuration){
|
|
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
|
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
|
delay(aDuration);
|
|
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
|
}
|
|
void noTone(uint8_t aPinNumber){
|
|
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
|
}
|
|
#endif // ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
|
|
|
#define IR_RECEIVE_PIN 15 // D15
|
|
#define IR_SEND_PIN 4 // D4
|
|
#define TONE_PIN 27 // D27 25 & 26 are DAC0 and 1
|
|
#define APPLICATION_PIN 16 // RX2 pin
|
|
|
|
#elif defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) // BluePill
|
|
// Timer 3 blocks PA6, PA7, PB0, PB1 for use by Servo or tone()
|
|
#define IR_RECEIVE_PIN PA6
|
|
#define IR_RECEIVE_PIN_STRING "PA6"
|
|
#define IR_SEND_PIN PA7
|
|
#define IR_SEND_PIN_STRING "PA7"
|
|
#define TONE_PIN PA3
|
|
#define _IR_TIMING_TEST_PIN PA5
|
|
#define APPLICATION_PIN PA2
|
|
#define APPLICATION_PIN_STRING "PA2"
|
|
# if defined(ARDUINO_GENERIC_STM32F103C) || defined(ARDUINO_BLUEPILL_F103C8)
|
|
// BluePill LED is active low
|
|
#define FEEDBACK_LED_IS_ACTIVE_LOW
|
|
# endif
|
|
|
|
#elif defined(ARDUINO_ARCH_APOLLO3) // Sparkfun Apollo boards
|
|
#define IR_RECEIVE_PIN 11
|
|
#define IR_SEND_PIN 12
|
|
#define TONE_PIN 5
|
|
|
|
#elif defined(ARDUINO_ARCH_MBED) && defined(ARDUINO_ARCH_MBED_NANO) // Arduino Nano 33 BLE
|
|
#define IR_RECEIVE_PIN 3 // GPIO15 Start with pin 3 since pin 2|GPIO25 is connected to LED on Pi pico
|
|
#define IR_SEND_PIN 4 // GPIO16
|
|
#define TONE_PIN 5
|
|
#define APPLICATION_PIN 6
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 7 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 8
|
|
|
|
#elif defined(ARDUINO_ARCH_RP2040) // Arduino Nano Connect, Pi Pico with arduino-pico core https://github.com/earlephilhower/arduino-pico
|
|
#define IR_RECEIVE_PIN 15 // GPIO15 to be compatible with the Arduino Nano RP2040 Connect (pin3)
|
|
#define IR_SEND_PIN 16 // GPIO16
|
|
#define TONE_PIN 17
|
|
#define APPLICATION_PIN 18
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 19 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 20
|
|
|
|
// If you program the Nano RP2040 Connect with this core, then you must redefine LED_BUILTIN
|
|
// and use the external reset with 1 kOhm to ground to enter UF2 mode
|
|
#undef LED_BUILTIN
|
|
#define LED_BUILTIN 6
|
|
|
|
#elif defined(PARTICLE) // !!!UNTESTED!!!
|
|
#define IR_RECEIVE_PIN A4
|
|
#define IR_SEND_PIN A5 // Particle supports multiple pins
|
|
|
|
#define LED_BUILTIN D7
|
|
|
|
/*
|
|
* 4 times the same (default) layout for easy adaption in the future
|
|
*/
|
|
#elif defined(TEENSYDUINO) // Teensy 2.0 is handled at default for ATmega328 like on Uno, Nano, Leonardo etc.
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
#elif defined(ARDUINO_ARCH_MBED) // Arduino Nano 33 BLE
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
#elif defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_SAM)
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
|
|
#if !defined(ARDUINO_SAMD_ADAFRUIT) && !defined(ARDUINO_SEEED_XIAO_M0)
|
|
// On the Zero and others we switch explicitly to SerialUSB
|
|
#define Serial SerialUSB
|
|
#endif
|
|
|
|
// Definitions for the Chinese SAMD21 M0-Mini clone, which has no led connected to D13/PA17.
|
|
// Attention!!! D2 and D4 are swapped on these boards!!!
|
|
// If you connect the LED, it is on pin 24/PB11. In this case activate the next two lines.
|
|
//#undef LED_BUILTIN
|
|
//#define LED_BUILTIN 24 // PB11
|
|
// As an alternative you can choose pin 25, it is the RX-LED pin (PB03), but active low.In this case activate the next 3 lines.
|
|
//#undef LED_BUILTIN
|
|
//#define LED_BUILTIN 25 // PB03
|
|
//#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW
|
|
|
|
#elif defined (NRF51) // BBC micro:bit
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define APPLICATION_PIN 1
|
|
#define _IR_TIMING_TEST_PIN 4
|
|
|
|
#define tone(...) void() // no tone() available
|
|
#define noTone(a) void()
|
|
#define TONE_PIN 42 // Dummy for examples using it
|
|
|
|
#else
|
|
#warning Board / CPU is not detected using pre-processor symbols -> using default values, which may not fit. Please extend PinDefinitionsAndMore.h.
|
|
// Default valued for unidentified boards
|
|
#define IR_RECEIVE_PIN 2
|
|
#define IR_SEND_PIN 3
|
|
#define TONE_PIN 4
|
|
#define APPLICATION_PIN 5
|
|
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
|
#define _IR_TIMING_TEST_PIN 7
|
|
#endif // defined(ESP8266)
|
|
|
|
#if defined(ESP32) || defined(ARDUINO_ARCH_RP2040) || defined(PARTICLE) || defined(ARDUINO_ARCH_MBED)
|
|
#define SEND_PWM_BY_TIMER // We do not have pin restrictions for this CPU's, so lets use the hardware PWM for send carrier signal generation
|
|
#else
|
|
# if defined(SEND_PWM_BY_TIMER)
|
|
#undef IR_SEND_PIN // SendPin is determined by timer! This avoids warnings in IRremote.hpp and IRTimer.hpp
|
|
# endif
|
|
#endif
|
|
|
|
#if !defined (FLASHEND)
|
|
#define FLASHEND 0xFFFF // Dummy value for platforms where FLASHEND is not defined
|
|
#endif
|
|
#if !defined (RAMEND)
|
|
#define RAMEND 0xFFFF // Dummy value for platforms where RAMEND is not defined
|
|
#endif
|
|
#if !defined (RAMSIZE)
|
|
#define RAMSIZE 0xFFFF // Dummy value for platforms where RAMSIZE is not defined
|
|
#endif
|
|
|
|
/*
|
|
* Helper macro for getting a macro definition as string
|
|
*/
|
|
#if !defined(STR_HELPER)
|
|
#define STR_HELPER(x) #x
|
|
#define STR(x) STR_HELPER(x)
|
|
#endif
|